MIC2844A Datasheet, PDF (2/14 Pages) Micrel Semiconductor – High Efficiency 6 Channel WLED Driver with DAM™ and Single Wire Digital Control

Micrel Inc.
Ordering Information
Part Number
Mark Code⁽¹⁾
Temperature Range
Package⁽²⁾
MIC2844AYMT
T4Y
–40°C to +125°C
10-Pin 2mm x 2mm Thin MLF^®
Note:
1. Thin MLF^® S = Pin 1 identifier.
2. Thin MLF^® is a GREEN RoHS compliant package. Lead finish is NiPdAu. Mold compound is halogen free.
MIC2844A
Pin Configuration
VIN 1
DC 2
RSET 3
GND 4
D6 5
10 D1
9 D2
8 D3
7 D4
6 D5
10-Pin 2mm x 2mm Thin MLF^® (MT)
(Top View)
Pin Description
Pin Number
1
2
Pin Name
VIN
DC
3
RSET
4
5
6
7
8
9
10
EPAD
GND
D6
D5
D4
D3
D2
D1
HS PAD
Pin Function
Voltage Input. Connect at least 1µF ceramic capacitor between VIN and GND.
Digital control input for linear WLED driver. See Digital Dimming Interface. Do not leave
floating.
An internal 1.27V reference sets the nominal maximum WLED current. Example, apply a 20.5kΩ
resistor between RSET and GND to set LED current to 20mA at 100% duty cycle.
Ground.
LED6 driver. Connect LED anode to VIN and cathode to this pin.
LED5 driver. Connect LED anode to VIN and cathode to this pin.
LED4 driver. Connect LED anode to VIN and cathode to this pin.
LED3 driver. Connect LED anode to VIN and cathode to this pin.
LED2 driver. Connect LED anode to VIN and cathode to this pin.
LED1 driver. Connect LED anode to VIN and cathode to this pin.
Heat sink pad. Not internally connected. Connect to ground.
August 2009
2
M9999-080309-D