MIC2841A Datasheet, PDF (2/13 Pages) Micrel Semiconductor – High Efficiency 4 Channel Linear WLED Driver with DAM™ and Ultra Fast PWM™ Control

Micrel Inc.
Ordering Information
Part Number
Mark Code⁽¹⁾ Temperature Range
Package⁽²⁾
MIC2841AYMT
Q1Y
–40°C to +125°C
10-Pin 2mm x 2mm Thin MLF^®
Note:
1. Thin MLF^® ▲ = Pin 1 identifier.
2. Thin MLF^® is a GREEN RoHS compliant package. Lead finish is NiPdAu. Mold compound is halogen free.
MIC2841A
Pin Configuration
VIN 1
END 2
RSET 3
GND 4
N/C 5
10 D1
9 D2
8 D3
7 D4
6 N/C
10-Pin 2mm x 2mm Thin MLF^® (MT)
(Top View)
Pin Description
Pin Number
1
2
Pin Name
VIN
END
3
RSET
4
5
6
7
8
9
10
EPAD
GND
NC
NC
D4
D3
D2
D1
HS PAD
Pin Function
Voltage Input. Connect at least 1µF ceramic capacitor between VIN and GND.
Enable LED drivers. This pin can be used as a PWM input for dimming of WLEDs. Do not leave
floating.
An internal 1.27V reference sets the nominal maximum WLED current. Example, apply a 20.5kΩ
resistor between RSET and GND to set LED current to 20mA at 100% duty cycle.
Ground.
No Connect. This pin is not connected internally.
No Connect. This pin is not connected internally.
LED4 driver. Connect LED anode to VIN and cathode to this pin.
LED3 driver. Connect LED anode to VIN and cathode to this pin.
LED2 driver. Connect LED anode to VIN and cathode to this pin.
LED1 driver. Connect LED anode to VIN and cathode to this pin.
Heat sink pad. Not internally connected. Connect to ground.
June 2009
2
M9999-062909-C