MIC2169B Datasheet, PDF (19/24 Pages) Micrel Semiconductor – 500kHz PWM Synchronous Buck Control IC

Micrel, Inc.
• The compensation resistor and capacitors should be
placed right next to the COMP pin and the other side
should connect directly to the GND pin on the
MIC2169B rather than going to the plane.
MIC2169B
• Add place holders for gate resistors on the top and
bottom MOSFET gate drives. If necessary, gate
resistors of 10Ω or less should be used.
June 2009
19
M9999- 060309-A
[phone]