MIC38300_10 Datasheet, PDF (12/12 Pages) Micrel Semiconductor – HELDO 3A High Efficiency Low Dropout Regulator

Micrel, Inc.
Recommended Landing Pattern
MIC38300
LP # HMLF46T-28LD-LP-1
All units are in mm
Tolerance ± 0.05 if not noted
Red circle indicates Thermal Via. Size should be .300-.350 mm in diameter and it should be connected to GND plane for
maximum thermal performance.
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL [phone] FAX [phone] WEB http:/www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its
use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product
can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant
into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A
Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully
indemnify Micrel for any damages resulting from such use or sale.
© 2007 Micrel, Incorporated.
June 2010
12
M9999-061010-D