SY89834U Datasheet, PDF (10/10 Pages) Micrel Semiconductor – 2.5V/3.3V TWO INPUT , 1GHz LVTTL/CMOS-TO-LVPECL 1:4 FANOUT BUFFER/TRANSLATOR

Micrel
16 LEAD EPAD MicroLeadFrame™ (MLF-16)
PRELIMINARY
Precision Edge™
SY89834U
3.00BSC
2.75BSC
16
1
0.50 DIA ²
3
4
0.85
+0.15
–0.65
0.65
+0.15
–0.65
2.75BSC 3.00BSC
0.01
+0.04
–0.01
0.20 REF.
0.42
+0.18
–0.18
0.42
+0.18
–0.18
0.23
+0.07
–0.05
1.60
+0.10
–0.10
PIN 1 ID
N
1
2
3
1.60
+0.10
–0.10
4
TOP VIEW
12° max
SEATING
PLANE
0.42
+0.18
–0.18
0.5 BSC
1.5 REF
0.40
+0.05
–0.05
BOTTOM VIEW
CC
CL
0.5BSC
0.23
+0.07
–0.05
4
0.01
+0.04
–0.01
SECTION "C-C"
SCALE: NONE
1. DIMENSIONS ARE IN mm.
2. DIE THICKNESS ALLOWABLE IS 0.305mm MAX.
3. PACKAGE WARPAGE MAX 0.05mm.
4. THIS DIMENSION APPLIES TO PLATED TERMINAL AND IS MEASURED
BETWEEN 0.20mm AND 0.25mm FROM TIP.
5. APPLIES ONLY FOR TERMINALS
FOR EVEN TERMINAL/SIDE
Package
EP- Exposed Pad
Die
Rev. 02
CompSide Island
Heat Dissipation
Heat Dissipation
V_EE
Heavy Copper Plane
V_EE
Heavy Copper Plane
PCB Thermal Consideration for 16-Pin MLF™ Package
(Always solder, or equivalent, the exposed pad to the PCB.)
Package Notes:
Note 1. Package meets Level 2 moisture sensitivity classification, and are shipped in dry-pack form.
Note 2. Exposed pads must be soldered to a ground for proper thermal management.
MICREL, INC. 1849 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 [phone] FAX + 1 [phone] WEB http://www.micrel.com
The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2003 Micrel, Incorporated.
10