SY898530U Datasheet, PDF (1/11 Pages) Micrel Semiconductor – 500MHz 1:16 3.3V-to-2.5V LVPECL Fanout Buffer

SY898530U
500MHz 1:16 3.3V-to-2.5V LVPECL
Fanout Buffer
General Description
The SY898530U is a 1:16 Fanout buffer which can accept
most standard differential logic levels and outputs the
signal as a differential 2.5V LVPECL signal. The part can
amplify input signals as small as 150mVpp to the full
LVPECL output swing. The SY898530U is well suited for
clock distribution applications which demand versatility and
low-skew performance. It is pin-to-pin compatible with
IDT’s ICS8530 fanout buffer.
The SY898530U operates from a 3.3V ±5% core power
supply and a 2.5V ±5% output supply and is guaranteed
over the full commercial temperature range (0°C to
+70°C). It is available in a 48-pin TQFP lead-free package.
Data sheets and support documentation can be found on
Micrel’s web site at www.micrel.com.
Functional Block Diagram
Features
• 16 Differential 2.5V LVPECL outputs
• Differential CLK inputs. Accepts LVDS, LVPECL,
LVHSTL, SSTL, HCSL logic levels
• Translates any single-ended input signal to 2.5V
LVPECL levels with a resistor bias on /CLK input
• 500MHz maximum output frequency
• <50ps output skew
• <250ps part-to-part skew
• <2ns propagation delay
• 3.3V Core, 2.5V output operating supply
• 0°C to +70°C operating temperature
• Available in 48-pin TQFP package
• Pin-to-pin compatible with ICS8530
Applications
• Data distribution
• High-performance PCs
• Communications
• Parallel processor-based systems
Precision Edge is a registered trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax + 1 [phone] • http://www.micrel.com
January 2011
M9999-013111-C
[e-mail] or [phone]