English
Language : 

SY89832U_14 Datasheet, PDF (1/13 Pages) Micrel Semiconductor – 2.5V Ultra-Precision 1:4 LVDS Fanout Buffer/Translator with Internal Termination
SY89832U
2.5V Ultra-Precision 1:4 LVDS Fanout
Buffer/Translator with Internal Termination
Precision Edge®
General Description
The SY89832U is a 2.5V, high-speed, 2GHz differential,
low voltage differential swing (LVDS) 1:4 fanout buffer
optimized for ultra-low skew applications. Within device
skew is guaranteed to be less than 20ps over supply
voltage and temperature.
The differential input buffer has a unique internal
termination design that allows access to the termination
network through a VT pin. This feature allows the device to
easily interface to different logic standards. A VREF–AC
reference output is included for AC-coupled applications.
The SY89832U is a part of Micrel's high-speed clock
synchronization family. For 3.3V applications, see
SY89833L or SY89833AL. For applications that require a
different I/O combination, consult Micrel's website at
www.micrel.com and choose from a comprehensive
product line of high-speed, low-skew fanout buffers,
translators and clock generators.
Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com.
Features
 Guaranteed AC performance over temperature and
voltage:
 DC-to >2.0GHz throughput
 <570ps propagation delay (IN-to-Q)
 <20ps within-device skew
 <200ps rise/fall time
 Ultra-low jitter design:
 81fsRMS phase jitter
 Unique, patented input termination and VT pin accepts
DC- and AC-coupled inputs
 High-speed LVDS outputs
 2.5V voltage supply operation
 Industrial temperature range: –40C to +85C
 Available in a 16-pin (3mm × 3mm) QFN package
Applications
 Processor clock distribution
 SONET clock distribution
 Fibre Channel clock distribution
 Gigabit Ethernet clock distribution
Functional Block Diagram
Typical Performance
Precision Edge is a registered trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
September 10, 2014
Revision 3.0
tcghelp@micrel.com or (408) 955-1690