SY89547L_09 Datasheet, PDF (1/11 Pages) Micrel Semiconductor – 3.3V, 3.2Gbps DIFFERENTIAL 4:1 LVDS MULTIPLEXER with 1:2 FANOUT and INTERNAL TERMINATION

Micrel, Inc.
3.3V, 3.2Gbps DIFFERENTIAL 4:1 LVDS
MULTIPLEXER with 1:2 FANOUT and
INTERNAL TERMINATION
Precision Edge^®
Precision E^SYd⁸g⁹e^5®47L
SY89547L
FEATURES
s Selects among four differential inputs
s Provides two copies of the selected input
s Guaranteed AC performance over temp and voltage:
• DC-to > 3.2Gbps data rate throughput
• < 620ps In-to-Out t_pd
• < 150ps t_r/t_f
s Unique input isolation design minimizes crosstalk
s Ultra-low jitter design:
• < 1ps_RMS random jitter
• < 10ps_PP deterministic jitter
• < 10ps_PP total jitter (clock)
• < 0.7ps_RMS crosstalk-induced jitter
s Internal input termination
s Unique input termination and V_T pin accepts DC-
coupled and AC-coupled inputs (LVDS, LVPECL,
CML)
s 350mV LVDS output swing
s Power supply 3.3V ±10%
s –40°C to +85°C temperature range
s Available in 32-pin (5mm x 5mm) MLF^® package
APPLICATIONS
s SONET/SDH multi-channel select applications
s Fibre Channel applications
s GigE applications
TYPICAL PERFORMANCE
Output Amplitude
vs. Frequency
400
350
300
250
200
150
100
50
00 _{1000 2000 3000 4000 5000 6000}
FREQUENCY (MHz)
Precision Edge^®
DESCRIPTION
The SY89547L is a precision, high-speed 4:1 differential
multiplexer that provides two copies of the selected input.
The high speed LVDS (350mV) compatible outputs with a
guaranteed throughput of up to 3.2Gbps over temperature
and voltage.
The SY89547L differential inputs include Micrel’s unique,
3-pin internal termination design that allows access to the
termination network through a V_T pin. This feature allows
the device to easily interface to different logic standards,
both AC- and DC-coupled without external resistor-bias and
termination networks. The result is a clean, stub-free, low
jitter interface solution.
The SY89547L operates from a single 3.3V supply, and
is guaranteed over the full industrial temperature range
(–40°C to +85°C). For applications that require a 2.5V supply,
consider the SY89546U. For applications that only require
one differential output, consider the SY89544U or SY89545L.
The SY89547L is part of a Micrel’s Precision Edge^® product
family. All support documentation can be found on Micrel’s
web site at: www.micrel.com.
FUNCTIONAL BLOCK DIAGRAM
IN0
50Ω
V_T0
50Ω
/IN0
4:1 MUX
IN1
50Ω
V_T1
50Ω
/IN1
IN2
50Ω
V_T2
50Ω
/IN2
0
1
MUX
2
S1
3 ^S0
1:2 Fanout
Q0
/Q0
LVDS
Q1
/Q1
IN3
50Ω
V_T3
50Ω
/IN3
Precision Edge is a registered trademark of Micrel, Inc.
MicroLeadFrame and MLF are registered trademarks of Amkor Technology, Inc.
M9999-091809
[e-mail] or [phone]
1
SEL0 (CMOS/TTL)
SEL1 (CMOS/TTL)
Rev.: D Amendment: /0
Issue Date: September 2009