|
SY58627L Datasheet, PDF (1/18 Pages) Micrel Semiconductor – DC-to-6.4Gbps Backplane Receive Buffer with Four Stage Programmable Equalization and DC-Offset Control | |||
|
SY58627L
DC-to-6.4Gbps Backplane Receive Buffer with
Four Stage Programmable Equalization
and DC-Offset Control
Preliminary
General Description
The SY58627L high-speed, low jitter receive buffer is
optimized for backplane and transmission line data-path
management applications. The SY58627L is capable of
receiving serial data up to 6.4Gbps across up to 36
inches of FR4.
The SY58627L differential input includes Micrelâs
unique, 3-pin input termination architecture that directly
interfaces to any differential signal as small as 100mVpk
(AC- or DC-coupled) without any termination resistor
networks in the signal path. The outputs are 50â¦
source-terminated CML optimized to drive 400mVpk into
50⦠(100⦠load across the output pair). The I/O
termination is connected to a dedicated VTT pin for
added bias flexibility.
The SY58627L receiver input provides four levels of
equalization to compensate for degraded signals
resulting from transmission losses. The equalization is
programmed with a three-bit interface.
The SY58627L operates at 3.3V ±10% supply and is
guaranteed over the full industrial temperature range of
-40°C to +85°C. The SY58627L is part of Micrelâs high-
speed, Precision Edge® product line.
All data sheets and support documentation can be
found on Micrelâs web site at: www.micrel.com.
Features
Precision Edge®
⢠Selectable equalizing network to optimize incoming
data eye pattern
⢠Four selectable equalization levels
⢠Receives up to 36â FR4 PCB trace, or longer
combinations of FR4+cable+interconnect
⢠DC through 6.4Gbps data rate throughput
⢠Integrated loopback capability
⢠Unique, flexible I/O:
- Patented, Internal termination to VTTIN pin
interfaces to any differential AC- or DC-coupled
signals
- 50⦠source-terminated CML outputs minimize
round-trip reflections
- Wide input voltage range: 100mV to 1.3VPK
- Output disable
- DC-offset control with VTT I/O
⢠Input Loss-of-Signal
- Hysteresis included
⢠3.3V ±10% supply voltage
⢠-40°C to +85°C temperature range
⢠Available in 32-pin (5mm x 5mm) MLFTM package
Applications
⢠ATE, T&M backplane management
⢠Serial backplane management
⢠Combination FR4+cable+interconnect receiver
⢠Fibre Channel, GigE, SONET/SDH data transmission
⢠Electrical interface and interconnect applications that
require DC-offset control
Precison Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are trademarks of Amkor Technology, Inc.
Micrel Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel +1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
January 2006
M9999-012606-A
hbwhelp@micrel.com or (408) 955-1690
|
▷ |