SY58024U_07 Datasheet, PDF (1/11 Pages) Micrel Semiconductor – ULTRA-LOW JITTER DUAL 2 × 2 CROSSPOINT SWITCH w/ CML OUTPUTS AND INTERNAL I/O TERMINATION

Micrel, Inc.
ULTRA-LOW JITTER DUAL 2 × 2
CROSSPOINT SWITCH w/ CML OUTPUTS
AND INTERNAL I/O TERMINATION
Precision Edge^®
Precision E^Sd^Y5g⁸e^02®4U
SY58024U
FEATURES
s Guaranteed AC performance over temperature and
voltage:
• >10.7Gbps data throughput
• <60ps t_r/t_f times
• <350ps t_pd (IN-to-Q)
• <20ps skew
s Low jitter:
• <10ps_PP total jitter (clock)
• <1ps_RMS random jitter (data)
• <10ps_PP deterministic jitter (data)
s Crosstalk induced jitter: <0.7ps_RMS
s Unique, patent-pending input isolation minimizes
adjacent channel crosstalk
s Accepts an input signal as low as 100mV
s Unique, patent-pending input termination and VT pin
accepts DC-coupled and AC-coupled differential
inputs: LVPECL, LVDS, and CML
s Fully differential inputs/outputs
s 50Ω source terminated CML outputs
s Power supply 2.5V ±5% and 3.3V ±10%
s Industrial –40°C to +85°C temperature range
s Available in 32-pin (5mm × 5mm) MLF^® package
APPLICATIONS
Precision Edge^®
DESCRIPTION
The SY58024U is a 2.5V/3.3V precision, high-speed, fully
differential dual CML crosspoint switch. The SY58024U is
optimized to provide two identical output copies with less
than 20ps of skew and ultra-low jitter. The SY58024U can
process clock signals as fast as 6GHz or data patterns up
to 10.7Gbps.
The differential input includes Micrel’s unique, 3-pin input
termination architecture that allows the SY58024U to directly
interface to LVPECL, LVDS, and CML differential signal
(AC- or DC-coupled) without any level-shifting or termination
resistor networks in the signal path. The CML outputs
features a 400mV typical swing into 50Ω loads, and provides
an extremely fast rise/fall time guaranteed to be less than
60ps.
The SY58024U operates from a 2.5V ±5% supply or
3.3V ±10% supply and is guaranteed over the full industrial
temperature range (–40°C to +85°C). For applications that
require high-speed single channel CML switches, consider
the SY58023U. The SY58024U is part of Micrel’s high-
speed, Precision Edge^® product line.
Datasheets and support documentation can be found on
Micrel’s website at www.micrel.com.
s Gigabit Ethernet data/clock routing
s SONET data/clocking routing
s Switch fabric clock routing
s Redundant switchover
s Backplane redundancy
Precision Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology.
M9999-020207
[e-mail] or [phone]
1
Rev.: G Amendment: /0
Issue Date: February 2007