|
SY54017AR Datasheet, PDF (1/14 Pages) Micrel Semiconductor – Low Voltage 1.2V/1.8V CML 2:1 MUX 3.2Gbps, 2.5GHz | |||
|
SY54017AR
Low Voltage 1.2V/1.8V CML 2:1 MUX
3.2Gbps, 2.5GHz
General Description
The SY54017AR is a fully differential, low voltage
1.2V/1.8V CML 2:1 MUX. The SY54017AR can process
clock signals as fast as 3.2GHz or data patterns up to
3.2Gbps.
The differential input includes Micrelâs unique, 3-pin
input termination architecture that interfaces to LVPECL,
LVDS or CML differential signals, (AC- or DC-coupled
from a 2.5V driver) as small as 100mV (200mVPP)
without any level-shifting or termination resistor
networks in the signal path. For AC-coupled input
interface applications, an internal voltage reference is
provided to bias the VT pin. The outputs are CML, with
extremely fast rise/fall times guaranteed to be less than
95ps.
The SY54017AR operates from a 2.5V ±5% core supply
and a 1.8V or 1.2V ±5% output supply and is
guaranteed over the full industrial temperature range
(â40°C to +85°C). The SY54017AR is part of Micrelâs
high-speed, Precision Edge® product line.
Datasheets and support documentation can be found on
Micrelâs web site at: www.micrel.com.
Functional Block Diagram
Features
Precision Edge®
â 1.2V/1.8V CML 2:1 MUX
â Guaranteed AC performance over temperature and
voltage:
â DC-to- > 3.2Gbps throughput
â <310ps propagation delay (IN-to-Q)
â <20ps input-to-input skew
â <95ps rise/fall times
â Ultra-low jitter design
â <1psRMS cycle-to-cycle jitter
â <10psPP total jitter
â <1psRMS random jitter
â <10psPP deterministic jitter
â High-speed CML outputs
â 2.5V ±5% , 1.8/1.2V ±5% power supply operation
â Industrial temperature range: â40°C to +85°C
â Available in 16-pin (3mm x 3mm) MLF® package
Applications
â Data Distribution: OC-48, OC-48+FEC
â SONET clock and data distribution
â Fibre Channel clock and data distribution
â Gigabit Ethernet clock and data distribution
Markets
â Storage
â ATE
â Test and measurement
â Enterprise networking equipment
â High-end servers
â Access
â Metro area network equipment
Precision Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology.
Micrel Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel +1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
May 2008
M9999-053008-B
hbwhelp@micrel.com or (408) 955-1690
|
▷ |