SY10H841_06 Datasheet, PDF (1/7 Pages) Micrel Semiconductor – SINGLE SUPPLY QUAD PECL-TO-TTL W/LATCHED OUTPUT ENABLE

Micrel, Inc.
SINGLE SUPPLY QUAD
PECL-TO-TTL W/LATCHED
OUTPUT ENABLE
Precision Edge^®
Precision _SE^SYd^Y110g⁰⁰e^HH®884411
SY10H841
SY100H841
FEATURES
s Translates positive ECL to TTL (PECL-to-TTL)
s 300ps pin-to-pin skew
s 500ps part-to-part skew
s Differential internal design for increased noise
immunity and stable threshold inputs
s VBB reference output
s Single supply
s Enable input
s Latch enable input
s Extra TTL and ECL power/ground pins to reduce
cross-talk/noise
s High drive capability: 24mA each output
s Fully compatible with industry standard 10K, 100K
I/O levels
s Available in 16-pin SOIC package
BLOCK DIAGRAM
Precision Edge^®
DESCRIPTION
The SY10/100H841 are single supply, low skew
translating 1:4 clock drivers.
The devices feature a 24mA TTL output stage, with
AC performance specified into a 50pF load capacitance.
A latch is provided on-chip. When LEN is LOW (or left
open, in which case it is pulled low by the internal pull-
downs) the latch is transparent. A HIGH on the enable
pin (EN) forces all outputs LOW.
As frequencies increase to 40MHz and above, precise
timing and shaping of clock signals becomes extremely
important. The H841 solves several clock distribution
problems such as minimizing skew (300ps), maximizing
clock fanout (24mA drive), and precise duty cycle control
through a proprietary differential internal design.
The 10K version is compatible with 10KH ECL logic
levels. The 100K version is compatible with 100K levels.
VBB
D
D
LEN
DQ
EN
Q0
PIN NAMES
Pin
Function
Q1
GT
TTL Ground (0V)
VT
TTL VCC (+5.0V)
VE
ECL VCC (+5.0V)
Q2
GE
ECL Ground (0V)
D, D
Signal Input (PECL)
VBB
VBB Reference Output (PECL)
Q0 - Q3
Signal Outputs (TTL)
Q3
EN
Enable Input (PECL)
LEN
Latch Enable Input
Precision Edge is a registered trademark of Micrel, Inc.
M9999-032906
[e-mail] or [phone]
1
Rev.: G Amendment: /0
Issue Date: March 2006