SY10EP33V_10 Datasheet, PDF (1/11 Pages) Micrel Semiconductor – 5V/3.3V, 4GHz, ÷4 PECL/LVPECL Divider

SY10EP33V/SY100EP33V
5V/3.3V, 4GHz, ÷4 PECL/LVPECL Divider
Precision Edge^®
General Description
The SY10/100EP33V is an integrated ÷4 divider.
The V_BB pin, an internally-generated voltage supply, is
available to this device only. For single-ended input
conditions, the unused differential input is connected to
V_BB as a switching reference voltage. V_BB may also rebias
AC-coupled inputs. When used, decouple V_BB to V_CC via a
0.01µF capacitor and limit current sourcing or sinking to
0.5mA. When not used, V_BB should be left open.
The reset pin is asynchronous and is asserted on the
rising edge. Upon power-up, the internal flip-flops will
attain a random state; the reset allows for the synchronous
use of multiple EP33s in a system.
Features
ECL Pro™
• Guaranteed maximum frequency >4GHz
• 3.3V and 5V power supply options
• Guaranteed propagation delay <460ps over temperature
• Internal 75kΩ input pull-down resistors
• Wide operating temperature range (−40°C to +85°C)
• Available in 8-pin MSOP and SOIC packages
The 100K Series includes internal temperature
compensation circuitry.
Data sheets and support documentation can be found on
Micrel’s web site at www.micrel.com.
___________________________________________________________________________________________________________
Pin Configuration
Top View
(Available in MSOP or SOIC Package)
Pin Description
Pin Number
CLK, /CLK
RESET
VBB
Q, /Q
Pin Function
ECL Clock Inputs with Internal 75kΩ Pull-Down Transistor. Default State is LOW
ECL Asynchronous Reset
Reference Voltage Output
ECL Data Outputs
ECL Pro is a trademark of Micrel, Inc
Precision Edge is a registered trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax + 1 [phone] • http://www.micrel.com
December 2010
M9999-121010
[e-mail] or [phone]