SY10EP16V Datasheet, PDF (1/5 Pages) Micrel Semiconductor – 5V/3.3V HIGH-SPEED DIFFERENTIAL RECEIVER

5V/3.3V HIGH-SPEED
DIFFERENTIAL RECEIVER
SY10EP16V
FINAL
FEATURES
s 3.3V and 5V power supply options
s Bandwidth –3dB >2.5GHz
s Internal 75kΩ input pulldown resistor
s Faster version of SY10EL16V
s 10K ECL compatible I/O
s Improved output waveform characteristics
s Available in 8-pin (3mm) MSOP and SOIC packages
DESCRIPTION
The SY10EP16V is a high-speed differential receiver.
The device is functionally equivalent to the EL16V
devices, with higher performance capabilities. With output
transition times significantly faster than the EL16V, the
SY10EP16V is ideally suited for interfacing with high-
frequency sources.
The SY10EP16V provides a V_BB output for either
single-ended use or as a DC bias for AC coupling to the
device. The V_BB pin should be used only as a bias for
the SY10EP16V as its current sink/source capability is
limited. Whenever used, the V_BB pin should be bypassed
to ground via a 0.01µF capacitor.
Under open input conditions (pulled to V_EE), internal
input clamps will force the Q output LOW.
PIN CONFIGURATION/BLOCK DIAGRAM
NC 1
D2
/D 3
V_BB 4
8 V_CC
7Q
6 /Q
5 V_EE
Available in 8-Pin SOIC and MSOP Packages
PIN NAMES
Pin
D, /D
Q, /Q
V_BB
V_CC
V_EE
Function
ECL Data Inputs
ECL Data Outputs
Reference Voltage Output
Positive Power Supply
Negative Power Supply
Rev.: A Amendment: /1
1
Issue Date: December 2000