SY10EL16V_06 Datasheet, PDF (1/6 Pages) Micrel Semiconductor – 5V/3.3V DIFFERENTIAL RECEIVER

MicreL, Inc.
5V/3.3V DIFFERENTIAL
RECEIVER
SY10EL16V
SY1^S0^YE¹L⁰⁰1^E6^LV^16V
SY100EL16V
FEATURES
DESCRIPTION
■ 3.3V and 5V power supply options
■ 250ps propagation delay
■ High bandwidth output transitions
■ Internal 75KΩ input pull-down resistors
■ Replaces SY10/100EL16
■ Improved output waveform characteristics
■ Available in 8-pin (3×3mm) MSOP and SOIC package
The SY10/100EL16V are differential receivers. The
devices are functionally equivalent to the E116 devices,
with higher performance capabilities. With output
transition times significantly faster than the E116, the
EL16V is ideally suited for interfacing with high-frequency
sources.
The EL16V provides a VBB output for either single-
ended use or as a DC bias for AC coupling to the device.
The VBB pin should be used only as a bias for the EL16V
as its current sink/source capability is limited. Whenever
used, the VBB pin should be bypassed to ground via a
0.01µF capacitor.
Under open input conditions (pulled to VEE), internal
input clamps will force the Q output LOW.
PIN NAMES
Pin
D
Q
VBB
Function
Data Inputs
Data Outputs
Reference Voltage Output
M9999-061306
[e-mail] or [phone]
1
Rev.: I
Amendment: /1
Issue Date: June 2006