SY100S863_06 Datasheet, PDF (1/8 Pages) Micrel Semiconductor – 8-INPUT PECL DIFFERENTIAL MUX WITH TTL SELECTS

Micrel, Inc.
8-INPUT PECL
DIFFERENTIAL MUX
WITH TTL SELECTS
SY100S863
SY100S863
FEATURES
s Low skew
s Differential PECL inputs
s Differential cut-off PECL outputs capable of driving
25Ω load for driving data bus
s Tri-state TTL output
s TTL select and enable input
s Internal 75KΩ PECL input pull-down resistors
s PECL I/O fully compatible with industry standard
s Available in 28-pin PLCC package
DESCRIPTION
The SY100S863 is a PECL 8:1 multiplexer designed for
use in new, high-performance PECL systems. It has
differential PECL outputs and a standard TTL output. The
TTL select inputs (SEL0, SEL1, SEL2) determine which one
of the eight differential PECL data inputs (D0–D7) is
propagated to the outputs. The enable pin, EN, is provided
for expansion. When EN is at a TTL logic one level, both
PECL and TTL outputs are enabled. When the enable pin
is set to TTL logic zero level, both PECL outputs of the
differential pair are in cut-off and the TTL output is in a
three-state condition.
BLOCK DIAGRAM
D0 (4)
D0 (5)
D1 (6)
D1 (7)
D2 (8)
D2 (9)
D3 (10)
D3 (11)
D4 (27)
D4 (26)
D5 (25)
D5 (24)
D6 (23)
D6 (22)
D7 (21)
D7 (20)
8:1
MUX
(17) Q
(18) Q
(13) QTTL
PIN NAMES
Pin
D0, /D0 – D7, /D7
Q, /Q
QTTL
EN
SEL0,1,2
Function
Differential PECL Input Pairs
Differential PECL Outputs
TTL Output
Enable Input
Select Inputs
TTL INPUTS
M9999-032406
[e-mail] or [phone]
1
Rev.: G Amendment: /0
Issue Date: March 2006