SY100EP14U_10 Datasheet, PDF (1/10 Pages) Micrel Semiconductor – 2.5V/3.3V/5V 1:5 LVPECL/PECL/ECL/HSTL 2GHz CLOCK DRIVER WITH 2:1 DIFFERENTIAL INPUT MUX

Micrel, Inc.
2.5V/3.3V/5V 1:5 LVPECL/PECL/
ECL/HSTL 2GHz CLOCK DRIVER
WITH 2:1 DIFFERENTIAL INPUT MUX
Precision Edge^®
Precisio^Sn^YE¹⁰d⁰g^Ee^P1®4U
SY100EP14U
FEATURES
• ^{Guaranteed AC parameters over temp/voltage:}
• > 2GHz f_MAX
• < 25ps within-device skew
• < 275ps tr/tf time
• < 525ps prop delay
• ^{2:1 Differential MUX input}
• ^{Flexible supply voltage: 2.5V/3.3V/5V}
• ^{Wide operating temperature range: –40°C to +85°C}
• ^VBB ^{reference for single-ended or AC-coupled}
PECL inputs
• ^{100K ECL compatible outputs}
• ^{Inputs accept PECL/LVPECL/ECL/HSTL logic}
• ^{75kΩ internal input pull-down resistors}
• ^{Available in a 20-Pin TSSOP package}
ECL Pro™
DESCRIPTION
The SY100EP14U is a high-speed, 2GHz differential
PECL/ECL 1:5 fanout buffer optimized for ultra-low skew
applications. Within device skew is guaranteed to be less
than 25ps over temperature and supply voltage. The wide
supply voltage operation allows this fanout buffer to operate
in 2.5V, 3.3V, and 5V systems. A V_BB reference is included
for single-supply or AC-coupled PECL/ECL input
applications, thus eliminating resistor networks. When
interfacing to a single-ended or AC-coupled PECL/ECL input
signal, connect the V_BB pin to the unused /CLK pin, and
bypass the pin to V_CC through a 0.01µF capacitor.
The SY100EP14U features a 2:1 input MUX, making it
an ideal solution for redundant clock switchover applications.
If only one input pair is used, the other pair may be left
floating. In addition, this device includes a synchronous
enable pin that forces the outputs into a fixed logic state.
Enable or disable state is initiated only after the outputs are
in a LOW state, thus eliminating the possibility of a “runt”
clock pulse.
The SY100EP14U I/O are fully differential and 100K ECL
compatible. Differential 10K ECL logic can interface directly
into the SY100EP14U inputs.
The SY100EP14U is part of Micrel’s high-speed clock
synchronization family. For applications that require a
different I/O combination, consult the Micrel website at
www.micrel.com, and choose from a comprehensive product
line of high-speed, low-skew fanout buffers, translators, and
clock generators.
ECL Pro is a trademarks of Micrel, Inc.
Precision Edge is a registered trademarks of Micrel, Inc.
M9999-060910
[e-mail] or [phone]
1
Rev.: G
Amendment: /0
Issue Date: May 2010