MPD8020 Datasheet, PDF (1/2 Pages) Micrel Semiconductor – CMOS/DMOS Semicustom High-Voltage Array Summary Information*.Not Recommended for New Designs

MPD8020
Micrel
MPD8020
CMOS/DMOS Semicustom High-Voltage Array
Summary Information*—Not Recommended for New Designs
General Description
The Micrel MPD8020 is a Smart Power Application Specific
Integrated Circuit (ASIC). The MPD8020 features an array of
low-voltage CMOS analog and digital circuits and high-
voltage DMOS power transistors on a monolithic integrated
circuit. The MPD8020 provides the customer a proprietary
design with size, reliability, performance advantages.
Quick Turnaround
Prepared wafers can be held prior to the final process
(metallization) where the customer’s unique interconnect
pattern is applied. This speeds turnaround by allowing many
of the fabrication steps to be completed before the final
design is finished.
Voltage Ratings
The MPD8020’s logic and analog circuitry operate from a
single +5V to +15V supply. The high-voltage section oper-
ates from +20V to +100V. An optional internal charge pump,
plus two external components, can drive the internal N-channel
DMOS FET gates approximately 15V higher than the high-
voltage supply as required by high-side switch applications.
Fabrication Process
The MPD8020 CMOS/DMOS Semicustom High-Voltage Array
uses Micrel’s proprietary process which combines TTL/CMOS
compatible high-speed CMOS logic, CMOS analog, bipolar
analog, and high-voltage DMOS power devices in single IC.
Package Options
• Dice
• 16-pin to 48-pin plastic DIPs
• 16-pin to 48-pin ceramic DIPs
• Ceramic LCCs
• PLCCs
• Surface mount packages
• Fused-lead PLCCs and DIPs
• Custom packages
Support
The MPD8020 is supported from concept to packaged ICs by
Micrel’s designers, CAD systems, CAE simulations (includ-
ing SPICE, HILO, TIMVER), and an experienced fabrication
and test group.
Features
• Sixteen 100V, 200mA, 10Ω, N-channel, DMOS power
FETs with fully floating gates, drains, and sources
• DMOS can be paralleled for 100V, 3.2A, 0.625Ω,
single, half-bridge, full-bridge, or bilateral switches
• 200 uncommitted CMOS gates array
• Twelve TTL/CMOS I/O buffers
• Three op amp/comparator/Schmitt trigger circuits
• One unity-gain analog buffer
• 1.25V/2.5V bandgap reference
• Overtemperature sensor
• Charge pump (drives high-side switch gates above V_DD)
• Sixteen medium-current, current-sink drivers
• Sixteen high-voltage, level-shifting, high-side drivers
• Separate analog- and digital-ground pads
• Numerous logic, high-voltage, V_CC, and V_DD pads
• Resistors, capacitors, and a zener diode
• Military temperature specifications available
• Military, commercial, and power packages
Applications
• Switch-mode regulators
• Motor control
• Bilateral analog switch
• High-voltage switch
• Relay and solenoid driver
• Smart switch with bus decoder
• Half- or full-bridge driver
• 3-phase driver
• Lamp driver
• Differential line driver
• Automotive switch
• Printer solenoid driver
• High-voltage display driver
* Contact Micrel for more information.
Patents 4,951,101; 4,979,001
MPD8020 CMOS/DMOS/Bipolar Semicustom Array
11-2
1997