|
MIC915 Datasheet, PDF (1/12 Pages) Micrel Semiconductor – Dual 135MHz Low-Power Op Amp | |||
|
MIC915
Micrel
MIC915
Dual 135MHz Low-Power Op Amp
General Description
The MIC915 is a high-speed, unity-gain stable operational
amplifier. It provides a gain-bandwidth product of 135MHz
with a very low, 2.4mA supply current per op amp.
Supply voltage range is from ±2.5V to ±9V, allowing the
MIC915 to be used in low-voltage circuits or applications
requiring large dynamic range.
The MIC915 is stable driving any capacitative load and
achieves excellent PSRR, making it much easier to use than
most conventional high-speed devices. Low supply voltage ,
low power consumption, and small packing make the MIC915
ideal for portable equipment. The ability to drive capacitative
loads also makes it possible to drive long coaxial cables.
Features
⢠135MHz gain bandwidth product
⢠2.4mA supply current per op amp
⢠MSOP-10 package
⢠270V/µs slew rate
⢠drives any capacitive load
Applications
⢠Video
⢠Imaging
⢠Ultrasound
⢠Portable equipment
⢠Line drivers
Ordering Information
Part Number
MIC915BMM
Junction Temp. Range
â40°C to +85°C
Pin Configuration
INAâ 1
INA+ 2
V+(A) 3
INBâ 4
INB+ 5
MSOP-10
10 Vâ(A)*
9 OUTA
8 Vâ(B)*
7 OUTB
6 V+(B)
Pin Description
Pin Number
1
2
3
4
5
6
7
8
9
10
Pin Name
INAâ
INA+
V+(A)
INBâ
INB+
V+(B)
OUTB
Vâ(B)
OUTA
Vâ(A)
Pin Function
Inverting Input A
Noninverting Input A
Positive Supply Input (Op Amp A)
Inverting Input B
Noninverting Input B
Positive Supply Input (Op Amp B)
Output B
Negative Supply Input* (Op Amp B)
Output A
Negative Supply Input* (Op Amp A)
* Vâ pins must be externally shorted together
Package
MSOP-10
Micrel, Inc. ⢠1849 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel + 1 (408) 944-0800 ⢠fax + 1 (408) 944-0970 ⢠http://www.micrel.com
September 2000
1 Rev 8/00-A
MIC915
|
▷ |