|
MIC809_05 Datasheet, PDF (1/6 Pages) Micrel Semiconductor – Microprocessor Reset Circuits | |||
|
MIC809/810
Microprocessor Reset Circuits
General Description
The MIC809 and MIC810 are inexpensive microprocessor
supervisory circuits that monitor power supplies in micro-
processor based systems.
The function of these devices is to assert a reset if the power
supply drops below a designated reset threshold level. Several
different reset threshold levels are available to accommodate
3V, 3.3V or 5V powered systems.
The MIC809 has an active-low /RESET output, while the
MIC810 offers an active-high RESET output. The reset output
is guaranteed to remain asserted for a minimum of 140ms
after VCC has risen above the designated reset threshold
level. Having a push-pull output stage, the MIC809/810 does
not require a pull-up resistor at the output. The MIC809/810
comes in a 3-pin SOT-23 and SC-70 package.
The MIC809 is also available with a shorter reset timeout
(30ms min.). See the MIC809-5.
All support documentation can be found on Micrelâs web site
at www.micrel.com.
Features
⢠Precision voltage monitor for 3V, 3.3V or 5V power sup-
plies
⢠/RESET remains valid with VCC as low as 1.4V for SOT-
23 packaged part
⢠/RESET remains valid with VCC as low as 1V for SC70
packaged part
⢠Typically less than15µA supply current for SOT-23 pack-
aged part
⢠5µ typical supply current for SC70 packaged part
⢠140ms minimum reset pulse widths available
⢠Available in 3-pin SOT-23 and SC-70 package
Applications
⢠Portable equipment
⢠Intelligent instruments
⢠Critical microprocessor power monitoring
⢠Printers/computers
⢠Controllers
Typical Application
VCC
VCC
MIC809
RESET
VCC
µP
RESET
Micrel, Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel + 1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
April 2005
1
M0450-041405
|
▷ |