MIC5265_07 Datasheet, PDF (1/11 Pages) Micrel Semiconductor – 150mA μCap LDO Regulator

MIC5265
150mA µCap LDO Regulator
General Description
The MIC5265 is a 150mA LDO in lead-free Thin SOT-23-5
packaging ideal for applications where cost is the priority.
The MIC5265 is ideal for any application in portable
electronics, including both RF and Digital applications.
With low output noise and high PSRR, the MIC5265 is
ideal for noise sensitive applications such as RF. While the
fast transient response and active shutdown circuitry
makes it well-suited for powering digital circuitry.
The MIC5265 has a 2.7V to 5.5V input operating voltage
range, making it ideal for operation from a single cell
lithium ion battery or fixed 3.3V and 5V systems. The
MIC5265 come with an enable pin and can be put into a
zero off-mode current state.
The MIC5265 offers low dropout voltage (210mV at
150mA), low output noise (57µVrms), high PSRR and
integrates an active shutdown circuit on the output of each
regulator to discharge the output voltage when disabled.
Data sheets and supporting documentation can be found
on Micrel’s web site at: www.micrel.com
Features
• 2.7V to 5.5V supply voltage.
• Low 75µA quiescent current per LDO.
• Thin SOT-23-5 package.
• Low Noise – 57µVrms.
• High PSRR – 60dB at 1kHz.
• Low dropout voltage – 210mV at 150mA.
• Stable with ceramic output capacitors.
• Fast transient response.
• Active shutdown.
Applications
• Cellular Telephones
• PDAs
• GPS Receivers
____________________________________________________________________________________________________________
Typical Application
MIC5265-xxYD5
VIN
VOUT
EN
1µF
BYP _GND
0.01µF
Rx/Synth
1µF
RF Receiver
RF Power Supply
Power Supply
Rejection Ratio
-70
50mA
-60
-50
100mA
-40
150mA
-30
-20
VIN = VOUT + 1V
VOUT = 3.1V
BYP = 0.01µF
COUT = 1µF
00.01 _{0.1 1 10 100}
FREQUENCY (kHz)
1000
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax + 1 [phone] • http://www.micrel.com
February 2007
M9999-022307