|
MIC5212 Datasheet, PDF (1/9 Pages) Micrel Semiconductor – Dual 500mA LDO Regulator | |||
|
MIC5212
MIC5212
Dual 500mA LDO Regulator
Final
General Description
The MIC5212 is a dual linear voltage regulator with very-low
dropout voltage (typically 10mV at light loads and 350mV at
500mA), very-low ground current (225µA at 10mA output),
and better than 1% initial accuracy.
Both regulator outputs can supply up to 500mA at the same
time as long as each regulatorâs maximum junction tempera-
ture is not exceeded.
Key features include current limiting, overtemperature shut-
down, and protection against reversed battery.
The MIC5212 is available in a fixed 3.3V/2.5V output voltage
configuration. Other voltages are available; contact Micrel for
details.
Features
⢠Fused lead frame SOIC-8
⢠Up to 500mA per regulator output
⢠Low quiescent current
⢠Low dropout voltage
⢠Tight load and line regulation
⢠Low temperature coefficient
⢠Current and thermal limiting
⢠Reversed input polarity protection
Applications
⢠Hard disk drives
⢠CD R/W
⢠Bar code scanners
⢠SMPS post regulator/DC-to-DC modules
⢠High-efficiency linear power supplies
Micrel
Ordering Information
Part Number
Voltage Accuracy
MIC5212-SJBM
3.3V/2.5V 1.0%
Other voltages available. Contact Micrel for details.
Junction Temp. Range*
â40°C to +125°C
Package
8-lead SOIC
Typical Application
IN = 5V
4.7µF
MIC5212-SJBM
INA OUTA
INB
OUTB
VO1 = 3.3V
VO2 = 2.5V
GND
4.7µF 4.7µF
3.3V/2.5V Dual LDO
Micrel, Inc. ⢠1849 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel + 1 (408) 944-0800 ⢠fax + 1 (408) 944-0970 ⢠http://www.micrel.com
April 2003
1
MIC5212
|
▷ |