MIC37150_07 Datasheet, PDF (1/13 Pages) Micrel Semiconductor – 1.5A, Low Voltage μCap LDO Regulator

MIC37150/51/52/53
1.5A, Low Voltage µCap LDO Regulator
General Description
The Micrel MIC37150/51/52/53 is a 1.5A low-dropout
linear voltage regulator that provides a low voltage, high
current output with a minimum of external components. It
offers high precision, ultra-low dropout (500mV over
temperature), and low ground current.
The MIC37150/51/52/53 operates from an input of 2.25V
to 6.0V. It is designed to drive digital circuits requiring low
voltage at high currents (i.e., PLDs, DSPs, micro-
controllers, etc.). It is available in fixed and adjustable
output voltages. Fixed voltages include 1.5V, 1.65V, 1.8V,
2.5V and 3.3V. The adjustable version is capable of
supplying output voltages from 1.24V to 5.5V.
Features of the MIC37150/51/52/53 LDO include thermal
and current limit protection, and reverse current and
reverse battery protection. Logic enable and error flag pins
are available.
Junction temperature range of the MIC37150/51/52/53 is
from –40°C to +125°C.
For applications requiring input voltage greater than 6.0V,
see MIC3910x, MIC3915x, MIC3930x, and MIC3950x
LDOs.
Data sheets and support documentation can be found on
Micrel’s web site at www.micrel.com.
Features
• 1.5A minimum guaranteed output current
• 500mV maximum dropout voltage over temperature
– Ideal for 3.0V to 2.5V conversion
– Ideal for 2.5V to 1.8V, 1.65V, or 1.5V conversion
• Stable with ceramic or tantalum capacitor
• Wide input voltage range
– VIN: 2.25V to 6.0V
• ±1.0% initial output tolerance
• Fixed and adjustable output voltages
– MIC37150—3-pin fixed voltages
– MIC37151—5-pin S-Pak or 8-pin e-Pad SOIC
fixed voltages with flag
– MIC37152—5-pin adjustable voltage
– MIC37153—8-pin adjustable voltage with flag
• Excellent line and load regulation specifications
• Logic controlled shutdown
• Thermal shutdown and current limit protection
• Reverse-leakage protection
• Low profile 3 or 5-pin S-Pak packages or 8-pin e-Pad
SOIC
Applications
• LDO linear regulator for low-voltage digital IC
• PC add-in cards
• High efficiency linear power supplies
• SMPS post regulator
• Battery charger
Typical Application
V_IN = 3.0V
C_IN
MIC37151
VIN
VOUT
VEN
FLG
GND
100k
V_OUT = 2.5V V_IN
C_OUT
47µF, Ceramic
C_IN
MIC37152
VIN
VOUT
R1
VEN
ADJ
GND
R2
1.3V
C_OUT
47µF, Ceramic
Fixed 2.5V Regulator with Error Flag
Adjustable Regulator
Super ßeta PNP is a trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax + 1 [phone] • http://www.micrel.com
October 2007
M9999-101907