MIC2981 Datasheet, PDF (1/4 Pages) Micrel Semiconductor – High-Voltage High-Current Source Driver Array Preliminary Information

MIC2981/2982
Micrel
MIC2981/2982
High-Voltage High-Current Source Driver Array
Preliminary Information
General
The MIC2981/82 is an 8-channel, high-voltage, high-current
source driver array ideal for switching high-power loads from
logic-level TTL, CMOS, or PMOS control signals.
These drivers can manage multiple loads of up to 50V and
500mA, limited only by package power dissipation.
Micrel’s MIC2981/82 features inputs compatible with 5V TTL
and 5V to 15V CMOS or PMOS logic outputs. Micrel’s dual-
marked device replaces either UDN2981 or UDN2982 de-
vices.
The MIC2981/82 is available in the 18-pin plastic DIP and 18-
lead wide SOP package. Both devices operate in the indus-
trial temperature range.
Functional Diagrams
Features
• Output voltage to 50V
• Output current to 500mA
• Transient-protected outputs
• Integral clamp diodes
• TTL, CMOS, or PMOS compatible inputs
Applications
• Relay and solenoid switching
• Stepping motor
• LED and incandescent displays
Ordering Information
Part Number
Temperature Range
Package
MIC2981BN/
MIC2982BN*
–40°C to +85°C
18-pin DIP
MIC2981BWM/
MIC2982BWM*
–40°C to +85°C 18-pin wide SOP
* Orders for MIC2981BN or MIC2982BN will be filled with dual-marked
MIC2981/82BN. Orders for MIC2981BWM or MIC2982BWM will be
filled with dual-marked MIC2981/82BWM.
IN1
IN2
IN3
IN4–IN7
4
IN8
V_S
MIC2981
MIC2982
OUT1
OUT2
OUT3
OUT4–OUT7
OUT8
GND
V_S
20k
IN
GND
1.8k
800Ω
1.5k
OUT
Typical MIC2891/2982 Source Driver
Micrel, Inc. • 1849 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 [phone] • fax + 1 [phone] • http://www.micrel.com
November 1999
1
MIC2981/2982