English
Language : 

MIC2937A Datasheet, PDF (1/9 Pages) Micrel Semiconductor – 750mA Low-Dropout Voltage Regulator
MIC2937A/29371/29372
Micrel
MIC2937A/29371/29372
750mA Low-Dropout Voltage Regulator
General Description
The MIC2937A family are “bulletproof” efficient voltage
regulators with very low dropout voltage (typically 40mV at
light loads and 300mV at 500mA), and very low quiescent
current (160µA typical). The quiescent current of the MIC2937A
increases only slightly in dropout, thus prolonging battery life.
Key MIC2937A features include protection against reversed
battery, fold-back current limiting, and automotive “load dump”
protection (60V positive transient).
The MIC2937 is available in several configurations. The
MIC2937A-xx devices are three pin fixed voltage regulators
with 3.3V, 5V, and 12V outputs available. The MIC29371 is a
fixed regulator offering logic compatible ON/OFF switching
input and an error flag output. This flag may also be used as
a power-on reset signal. A logic-compatible shutdown input is
provided on the adjustable MIC29372, which enables the
regulator to be switched on and off.
Features
• High output voltage accuracy
• Guaranteed 750mA output
• Low quiescent current
• Low dropout voltage
• Extremely tight load and line regulation
• Very low temperature coefficient
• Current and thermal limiting
• Input can withstand –20V reverse battery and +60V
positive transients
• Error flag warns of output dropout
• Logic-controlled electronic shutdown
• Output programmable from 1.24V to 26V(MIC29372)
• Available in TO-220, TO-263, TO-220-5, and TO-263-5
packages.
Applications
• Battery Powered Equipment
• Cellular Telephones
• Laptop, Notebook, and Palmtop Computers
• PCMCIA VCC and VPP Regulation/Switching
• Bar Code Scanners
• Automotive Electronics
• SMPS Post-Regulator/ DC to DC Modules
• High Efficiency Linear Power Supplies
Pin Configuration
INPUT GROUND OUTPUT
TO-263 Package
(MIC2937A-xxBU)
1 2345
TO-263-5 Package
(MIC29371/29372BU)
Five Lead Package Pin Functions:
MIC29371 MIC29372
1) Error
Adjust
2) Input
Shutdown
3) Ground Ground
4) Output
Input
5) Shutdown Output
12 3
INPUT FGrRonOtUVNieDw OUTPUT
1 2345
TO-220 Package
(MIC2937A-xxBT)
TO-220-5 Package
(MIC29371/29372BT)
The TAB is Ground on the TO-220 and TO-263 packages.
3-18
October 1999