English
Language : 

MIC2870 Datasheet, PDF (1/25 Pages) Micrel Semiconductor – 1.5A Synchronous Boost Flash LED Driver with I2C Interface
MIC2870
1.5A Synchronous Boost Flash LED Driver
with I2C Interface
General Description
The MIC2870 is a high-current, high-efficiency flash LED
driver for one or two high-brightness camera flash LEDs.
The LED driver current is generated by an integrated
inductive boost converter with 2MHz switching frequency
which allows the use of a very-small inductor and output
capacitor. These features make the MIC2870 an ideal
solution for high-resolution camera phone LED flashlight
driver applications.
MIC2870 supports two 750mA white-LEDs (WLEDs) or a
single 1.5A WLED configuration. When two WLEDs are
connected, their currents are matched automatically.
MIC2870 operates in either flash or torch modes that can
be controlled through either an I2C interface or external
pins. The brightness in the flash and torch mode can be
adjusted via two external resistors individually. High-speed
mode I2C interface provides a simple control at a clock
speed up to 3.4MHz to support most camera functions
such as auto-focus, white balance, and image capture
(flash mode).
The MIC2870 is available in 16-pin, 2mm × 2mm TQFN
package with a junction temperature range of −40°C to
+125°C.
Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com.
Features
• Up to 1.5A flash LED driving current
− 2.7V to 5.0V input voltage range
• High-efficiency 2MHz VF adaptive boost driver
• Configurable 1 or 2 channel(s) WLED driver
• LED driving current soft-start
• Control through I2C interface or external pins
• Flash inhibit function for GSM pulse synchronization
• True load disconnect
• Flash time-out protection
• 1µA shutdown current
• Available in 16-pin 2mm × 2mm TQFN package
Applications
• Camera phones/mobile handsets
• Cellular phones/smart phones
• LED light for image capture/auto focus/white balance
• Handset video light (torch light)
• Digital cameras
• Portable applications
Typical Application
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
September 5, 2013
Revision 1.0