MIC2753_02 Datasheet, PDF (1/12 Pages) Micrel Semiconductor – Power Supply Supervisors

MIC2753/2754
MIC2753/2754
Power Supply Supervisors
Final Information
Micrel
General Description
The MIC2753 and MIC2754 are ultraminiature, full-featured,
power supply supervisors featuring active-high and active-
low reset outputs, respectively.
The MIC2753/4 includes an undervoltage detector with a
power-on reset generator and reset output, an overvoltage
detector with a separate output for activating crowbar circuits,
and a debounced manual reset input. Typical supply current
is a low 30µA.
These devices provide a 140ms minimum reset output at
power-on and assert their reset outputs any time the input
voltage deviates beyond preset overvoltage or undervoltage
thresholds. Reset outputs remain asserted for 140ms (mini-
mum) after the input returns to normal or after releasing the
manual reset. When an overvoltage condition is detected, the
overvoltage output is immediately activated. Hysteresis on
both thresholds prevents erratic operation due to noise.
Features
• Undervoltage and overvoltage monitor
• Separate overvoltage flag output
• Generates 140ms (minimum) power-on reset pulse
• Debounced manual reset input
• Choice of active-high (MIC2753) or
active-low (MIC2754) reset outputs
• Low 30µA typical supply current
• No external components needed
• IttyBitty™ SOT-23-5 package
Applications
• Computer systems
• Embedded controllers
• Power supplies
• Telecommunications systems
Typical Application
V_CC
Fuse
Manual
Reset
MIC2754
VIN RST
MR HV
GND
Microcontroller
VCC
GND
RST IN
SCR
Crowbar
Micrel, Inc. • 1849 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 [phone] • fax + 1 [phone] • http://www.micrel.com
June 1999
1
MIC2753/2754