|
MIC26903ZA_14 Datasheet, PDF (1/29 Pages) Micrel Semiconductor – 28V, 9A Hyper Speed Control Synchronous DC/DC Buck Regulator | |||
|
MIC26903-ZA
28V, 9A Hyper Speed Controlï¤
Synchronous DC-to-DC Buck Regulator
SuperSwitcher⢠II
General Description
The Micrel MIC26903-ZA is a constant-frequency,
synchronous buck regulator featuring a unique adaptive
on-time control architecture. The MIC26903-ZA operates
over an input supply range of 4.5V to 28V and provides a
regulated output of up to 9A of output current. The output
voltage is adjustable down to 0.6V with a guaranteed
accuracy of ±1%, and the device operates at a switching
frequency of 600kHz.
Micrelâs Hyper Speed Controlï¤ architecture allows for
ultra-fast transient response while reducing the output
capacitance and also makes (High VIN)/(Low VOUT)
operation possible. This adaptive tON ripple control
architecture combines the advantages of fixed-frequency
operation and fast transient response in a single device.
The MIC26903-ZA offers a full suite of features to ensure
protection of the IC during fault conditions. These include
undervoltage lockout to ensure proper operation under
power-sag conditions, internal soft-start to reduce inrush
current, foldback current limit, âhiccup modeâ short-circuit
protection, and thermal shutdown. An open-drain Power
Good (PG) pin is provided.
Datasheets and support documentation are available on
Micrelâs web site at: www.micrel.com.
SuperSwitcher⢠II
Features
ï· Hyper Speed Control architecture enables
ï High Delta V operation (VIN = 28V and VOUT = 0.6V)
ï Small output capacitance
ï· 4.5V to 28V voltage input
ï· 9A output current capability and 95% peak efficiency
ï· Adjustable output from 0.6V to 5.5V
ï· Â±1% feedback accuracy
ï· Any Capacitorï¤ stable - zero-to-high ESR
ï· 600kHz switching frequency
ï· No external compensation
ï· Power Good (PG) output
ï· Foldback I-limit and âhiccupâ short-circuit protection
ï· Supports safe startup into a pre-biased load
ï· â40°C to +125°C junction temperature range
ï· 28-pin 5mm à 6mm QFN package
Applications
ï· Distributed POL and telecom/networking infrastructure
ï· Printers, scanners, graphic and video cards
ï· Set-top boxes, gateways and routers
Typical Application
100
95
90
85
80
75
70
65
60
55
50
0
Efficiency (VIN = 12V)
vs. Output Current
5.0V
3.3V
2.5V
1.8V
1.5V
1.2V
1.0V
0.9V
VIN = 12V
2
4
6
8
10
12
OUTPUT CURRENT (A)
Hyper Speed Control, SuperSwitcher II, and Any Capacitor are trademarks of Micrel, Inc.
Micrel Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel +1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
July 22, 2014
Revision 1.1
|
▷ |