English
Language : 

MIC2570 Datasheet, PDF (1/14 Pages) Micrel Semiconductor – Two-Cell Switching Regulator Preliminary Information
MIC2570
MIC2570
Two-Cell Switching Regulator
Preliminary Information
Micrel
General Description
Micrel’s MIC2570 is a micropower boost switching regulator
that operates from two alkaline, two nickel-metal-hydride
cells, or one lithium cell.
The MIC2570 accepts a positive input voltage between 1.3V
and 15V. Its typical no-load supply current is 130µA.
The MIC2570 is available in selectable fixed output or adjust-
able output versions. The MIC2570-1 can be configured for
2.85V, 3.3V, or 5V by connecting one of three separate
feedback pins to the output. The MIC2570-2 can be config-
ured for an output voltage ranging between its input voltage
and 36V, using an external resistor network.
The MIC2570 has a fixed switching frequency of 20kHz. An
external SYNC connection allows the switching frequency to
be synchronized to an external signal.
The MIC2570 requires only four components (diode, induc-
tor, input capacitor and output capacitor) to implement a
boost regulator. A complete regulator can be constructed in
a 0.6 in2 area.
All versions are available in an 8-lead SOIC with an operating
range from –40°C to +85°.
Features
• Operates from a two-cell supply
1.3V to 15V operation
• 130µA typical quiescent current
• Complete regulator fits 0.6 in2 area
• 2.85V/3.3V/5V selectable output voltage (MIC2570-1)
• Adjustable output up to 36V (MIC2570-2)
• 1A current limited pass element
• Frequency synchronization input
• 8-lead SOIC package
Applications
• LCD bias generator
• Glucose meters
• Single-cell lithium to 3.3V or 5V converters
• Two-cell alkaline to ±5V converters
• Two-cell alkaline to –5V converters
• Battery-powered, hand-held instruments
• Palmtop computers
• Remote controls
• Detectors
• Battery Backup Supplies
Typical Applications
2.0V–3.1V
2 AA Cells
C1
100µF
10V
L1
47µH
D1
MBRA140
5V/100mA
8
IN
MIC2570-1 SW 1
2.85V 6
3.3V 5
5V 4
SYNC GND
7
2
C2
220µF
10V
C1
2.5V to 4.2V 100µF
1 Li Cell
10V
L1
1 50µH 2
U1
8
IN
SW 1
MIC2570
5
3.3V
SYNC GND
7
2
C2
100µF
10V MBRA140
3
D1
L1
4
VOUT
3.3V/80mA
C3
330µF
6.3V
Two-Cell to 5V DC-to-DC Converter
Single-Cell Lithium to 3.3V/80mARegulator
4-62
1997