|
MIC2282 Datasheet, PDF (1/10 Pages) Micrel Semiconductor – Single-Cell Ultra Low EMI Boost LED Driver | |||
|
MIC2282
Single-Cell Ultra Low EMI
Boost LED Driver
General Description
Features
The MIC2282 is a boost LED driver optimized for single
cell operation from alkaline, nickel-metal-hydride, or lithium
ion batteries. The MIC2282 operates with an input voltage
between 0.9V to 15V, driving a string of series LEDs up to
33V. The combination of a low feedback voltage of 220mV
and an operating current of 120μA provides a high
efficiency solution that prolongs battery life.
⢠Operates from a single-cell supply (VIN = 0.9V to 15V)
⢠Ultra Low EMI
⢠120µA typical quiescent current
⢠Adjustable output voltages
⢠220mV sense voltage
⢠20kHz switching frequency
The MIC2282 requires only five external components
(diode, inductor, sense resistor, input capacitor and output
capacitor) to implement a low cost LED boost regulator. It
is available in a compact 8-pin MSOP package with an
operating range from â40°C to +125°.
⢠Over temperature protection
⢠8-pin MSOP package
⢠Low component count solution
Data sheets and support documentation can be found on
Micrelâs web site at: www.micrel.com.
Applications
⢠LED flashlight and head lamps
⢠LCD bias generator
⢠Battery-powered, hand-held instruments
⢠Palmtop computers
⢠Remote controls
⢠Detectors
___________________________________________________________________________________________________________
Typical Application
L1
D1
220µH MBR0530
1V to1.5V
1 Cell
C1
47µF
16V
8
IN
SW 1
MIC2282 SNS 6
GND GND
7
2
SNS
VOUT = 3V
100µF
1V to1.5V
1 Cell
C1
47µF
16V
L1
D1
220µH MBR0530
8
IN
SW 1
MIC2282 SNS 6
GND GND
7
2
SNS
VOUT = 9V
100µF
Single-Cell to 3V DC-to-DC Converter
Triple-Cell to 9V DC-to-DC Converter
Micrel Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel +1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
October 2009
M9999-102309
|
▷ |