|
MIC2253 Datasheet, PDF (1/13 Pages) Micrel Semiconductor – 3.5A 1MHz High Efficiency Boost Regulator with OVP and Softstart | |||
|
MIC2253
3.5A 1MHz High Efficiency
Boost Regulator with OVP and Softstart
General Description
Features
The MIC2253 is a high power density 1MHz PWM DC/DC
boost regulator. The 3.5A minimum switch current limit
combined with a 1MHz switching frequency allows the
MIC2253 to use smaller inductors and deliver high power
in a tiny solution size.
The 2.5V to 10V input voltage range of MIC2253 allows
direct operation from 1 and 2 cell Li-ion as well as 3 to 4
cell NiCad, NiMH, Alkaline or lithium batteries. Maximum
battery life is assured with a low 0.1µA shutdown current.
The MIC2253 is available in a low profile 12-pin 3mm x
3mm MLF© package. To prevent a high inrush current, a
minimum 1ms soft-start period is set by default and the
MIC2253 has the ability to extend the soft-start period with
an external capacitor.
Datasheet and support documentation can be found on
Micrelâs web site at: www.micrel.com.
⢠3.5A minimum switch current
⢠1.245V ± 3% feedback voltage
⢠2.5V to 10V input voltage
⢠Output over-voltage protection (OVP)
⢠Externally programmable soft-start
⢠Output voltage up to 30V (max)
⢠Fixed 1MHz operation
⢠<1% line regulation
⢠0.1µA shutdown current
⢠Over temperature protection
⢠Under-voltage lockout (UVLO)
⢠12-pin 3mm x 3mm leadless MLF® package
⢠â40°C to +125°C junction temperature range
Applications
⢠Mobile handsets
⢠Portable media/MP3 players
⢠Portable navigation devices (GPS)
⢠WiFi/WiMax/WiBro modules
⢠Digital Cameras
⢠Wireless LAN cards
⢠USB powered devices
⢠Portable applications
___________________________________________________________________________________________________________
Typical Application
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
Micrel Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel +1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
February 2010
M9999-021710-B
|
▷ |