|
MIC2219 Datasheet, PDF (1/10 Pages) Micrel Semiconductor – Dynamically Adjustable Dual uCap LDO | |||
|
MIC2219
Micrel, Inc.
MIC2219
Dynamically Adjustable Dual µCap LDO
General Description
The MIC2219 is a dual µCap low dropout regulator. The first
regulator is capable of sourcing 150mA, while the second
regulator can source up to 300mA.
Ideal for battery operated applications, the MIC2219 offers
1% accuracy, extremely low dropout voltage (80mV @
100mA), and extremely low ground current, only 48µA total.
Equipped with TTL logic compatible enable pins, the MIC2219
can be put into a zero-off-mode current state, drawing no
current when disabled. Separate enable pins allow individual
control of each output voltage.
The additional feature incorporated in the MIC2219 is bring-
ing out the feedback nodes to two external pins, allowing for
dynamic adjustment of the LDO output voltages.
The MIC2219 is a µCap design, operating with very small
ceramic output capacitors for stability, reducing required
board space and component cost.
The MIC2219 is available in fixed output voltages in the
10-pin 3mm à 3mm MLF⢠leadless package.
Features
⢠Input voltage range: 2.25V to 5.5V
⢠Stable with ceramic output capacitor
⢠2 LDO outputs
Output 1 - 150mA output current
Output 2 - 300mA output current
⢠Feedback pins externally accessible
⢠Low dropout voltage of 80mV @ 100mA
⢠Ultra-low quiescent current of 48µA total (24µA/LDO)
⢠High output accuracy:
+1.0% initial accuracy
+2.0% over temperature
⢠Thermal shutdown protection
⢠Current limit protection
⢠Tiny 10-pin 3mm à 3mm MLF⢠package
Applications
⢠Cellular phones
⢠Wireless modems
⢠PDAs
⢠LEDs
Typical Application
MIC2219-xxBML
VIN
VOUT1
OFF ON
EN1
OFF ON
EN2
VOUT2
FB1
1µF
Ceramic 1µF
0.01µF
CBYP
FB2
GND
Vibrator
Motor
LEDs Ã10
MIC2219 Typical Cell Phone Application
MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc.
Micrel, Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel + 1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
April 2005
1
M9999-042105
|
▷ |