|
MIC2212_06 Datasheet, PDF (1/10 Pages) Micrel Semiconductor – Dual μCap LDO and Power-On Reset | |||
|
MIC2212
MIC2212
Micrel, Inc.
Dual µCap LDO and Power-On Reset
General Description
The MIC2212 is a dual µCap low dropout regulator with
power-on reset circuit. The ï¬rst regulator is capable of sourcing
150mA, while the second regulator can source up to 300mA
and includes a power-on reset function.
Ideal for battery operated applications, the MIC2212 offers 1%
accuracy, extremely low dropout voltage (80mV @ 100mA),
and extremely low ground current, only 48µA total. Equipped
with TTL-logic-compatible enable pins, the MIC2212 can be
put into a zero-off-mode current state, drawing no current
when disabled.
The MIC2212 is a µCap design, operating with very small
ceramic output capacitors for stability, reducing required
board space and component cost.
The MIC2212 is available in ï¬xed output voltages in the
10-pin 3mm à 3mm MLF⢠leadless package.
Features
⢠Input voltage range: 2.25V to 5.5V
⢠Stable with ceramic output capacitor
⢠2 LDO outputs
⢠Output 1 â 150mA output current
⢠Output 2 â 300mA output current
⢠Power-on reset function with adjustable delay time
⢠Low dropout voltage of 80mV @ 100mA
⢠Ultra-low quiescent current of 48µA
⢠High output accuracy:
⢠+1.0% initial accuracy
⢠+2.0% over temperature
⢠Thermal shutdown protection
⢠Current limit protection
⢠Tiny 10-pin 3mm à 3mm MLF⢠package
Applications
⢠Cellular/PCS phones
⢠Wireless modems
⢠PDAs
Typical Application
Li-Ion
Batte ry
MIC2212-xxBML
VIN
VOUT1
EN1
VOUT2
EN2
POR
CBYP
SET
GND
VI/O
VCORE
/RST
Baseband
µProcessor
COUT = 1µF
Ceramic
Sets del ay for POR
MIC2212 Typical Cell Phone Application
MicroLeadFrame and MLF are trademarks of Amkor Technology.
Micrel, Inc. ⢠2180 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel + 1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
February 2006
1
M9999-022106
|
▷ |