|
MIC2211 Datasheet, PDF (1/9 Pages) Micrel Semiconductor – Dual UCap LDO in 3mm × 3mm MLF™ | |||
|
MIC2211
Micrel
MIC2211
Dual µCap LDO in 3mm à 3mm MLFâ¢
General Description
The MIC2211 is a dual µCap, low dropout regulator. The first
regulator is capable of sourcing 150mA, while the second
regulator can source up to 300mA.
Ideal for battery operated applications, the MIC2211 offers
1% accuracy, extremely low dropout voltage (80mV @
100mA), and extremely low ground current, only 48µA total.
Equipped with TTL logic compatible enable pins, the MIC2211
can be put into a zero-off-mode current state, drawing no
current when disabled. Separate enable pins allow individual
control of each output voltage.
The MIC2211 is a µCap design, operating with very small
ceramic output capacitors for stability, reducing required
board space and component cost.
The MIC2211 is available in fixed output voltages in the
10-pin 3mm à 3mm MLF⢠leadless package.
Features
⢠Input voltage range: 2.25V to 5.5V
⢠Stable with ceramic output capacitor
⢠2 LDO outputs
⢠Output 1 - 150mA output current
⢠Output 2 - 300mA output current
⢠Low dropout voltage of 80mV @ 100mA
⢠Ultra-low quiescent current of 48µA total (24µA/LDO)
⢠High output accuracy:
⢠+1.0% initial accuracy
⢠+2.0% over temperature
⢠Thermal shutdown protection
⢠Current limit protection
⢠Tiny 10-pin 3mm à 3mm MLF⢠package
Applications
⢠Cellular phones
⢠Wireless modems
⢠PDAs
Typical Application
MIC2211-xxBML
VIN
VOUT1
OFF ON
EN1
OFF ON
EN2
VOUT2
1µF
Ceramic 1µF
0.01µF
CBYP
GND
VI/O
VCORE
Baseband
µProcessor
MIC2211 Typical Cell Phone Application
MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc.
Micrel, Inc. ⢠1849 Fortune Drive ⢠San Jose, CA 95131 ⢠USA ⢠tel + 1 (408) 944-0800 ⢠fax + 1 (408) 474-1000 ⢠http://www.micrel.com
August 2004
1
M9999-080204
|
▷ |