MIC2145_05 Datasheet, PDF (1/15 Pages) Micrel Semiconductor – High Efficiency 2.5W Boost Converter

MIC2145
Micrel, Inc.
MIC2145
High Efficiency 2.5W Boost Converter
General Description
Features
The MIC2145 is a small size boost switching regulator that
can provide over 2.5W of output power. The input voltage
range is between 2.4V to 16V, making the device suitable for
one-cell Li-Ion and 3- to 4-cell alkaline/NiCad/NiMH applica-
tions. The output voltage of the MIC2145 can be adjusted up
to 16V.
The MIC2145 is well suited for portable, space-sensitive
applications. Its typical 450kHz operation allows small sur-
face mount external components to be used. The MIC2145
has a low quiescent current of 200µA, and a typical shutdown
current of 0.5µA. The MIC2145 is capable of high efficiencies
in a small board area.
The MIC2145 features a low-on resistance internal switch
that allows it to provide over 2.5W of output power. The peak
switch current can be programmed through an external
resistor. This allows the user to set the peak switch current at
the level where maximum efficiency occurs. It also allows the
user to further optimize for efficiency and inductor size by
setting the peak current below the level of inductor saturation.
• 2.4V to 16V input voltage
• Output adjustable to 16V
• Programmable peak current limit
• Soft start
• Up to 450kHz switching frequency
• 0.5µA shutdown current
• 200µA quiescent current
• Capable of 5V/ 500mA output with 3.3V input
• Achieves over 85% efficiency
• Implements low power BOOST, SEPIC, and FLYBACK
topologies
• MSOP-8 and 3mm×3mm MLF™-10L
Applications
• Flash LED driver
• LCD bias supply
• White LED driver
• DSL bias supply
• Local 3V to 5V conversion
The MIC2145 is available in an MSOP-8 and 3mm×3mm
MLF™-10L package with an ambient operating temperature
range from –40°C to +85°C.
Ordering Information
Part Number
Standard
Pb-Free
MIC2145BMM MIC2145YMM
MIC2145BML MIC2145YML
Voltage
Adj
Adj
Ambient
Temp. Range
–40°C to +85°C
–40°C to +85°C
Package
8-lead MSOP
10-lead MLF™
Typical Application
V_IN
3.0V to 5.0V
CIN
10µF/6.3V
I Limit
L1
10µH
1
EN
D1
5
SW
4
PGND
6
VDD
MIC2145BMM
3
RSET
FB ⁷
2 _SS
SGND ⁸
V_OUT
10V/150mA
COUT
10µF/16V
10V Output
Efficiency
90
85
80
75
70
65
V_IN = 3.0V
6010
100
1000
OUTPUT CURRENT (mA)
Adjustable Output Boost Converter with Programmable Peak Switch Current
MLF and MicroLeadFrame are trademarks of Amkor Technologies, Inc.
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 [phone] • fax + 1 [phone] • http://www.micrel.com
April 2005
1
M9999-042205