LP2950_08 Datasheet, PDF (1/17 Pages) Texas Instruments – ADJUSTABLE MICROPOWER VOLTAGE REGULATORS WITH SHUTDOWN

LP2950*/2951
100mA Low-Dropout Voltage Regulator
General Description
The LP2950 and LP2951 are micropower voltage
regulators with very low dropout voltage (typically 40mV at
light loads and 380mV at 100mA), and very low quiescent
current (75A typical). The quiescent current of the LP2950
/LP2951 increases only slightly in dropout, thus prolonging
battery life. This feature, among others, makes the LP2950
and LP2951 ideally suited for use in battery-powered
systems.
Available in a 3-pin TO-92 package, the LP2950 is pin-
compatible with the older 5V regulators. Additional system
functions, such as programmable output voltage and logic-
controlled shutdown, are available in the 8-pin DIP and 8-
pin SOIC versions of the LP2951.
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Features
• High accuracy 5V, guaranteed 100mA output
• Extremely low quiescent current
• Low-dropout voltage
• Extremely tight load and line regulation
• Very low temperature coefficient
• Use as regulator or reference
• Needs only 1µF for stability
LP2951 Versions Only
• Current and thermal limiting
• Error flag warns of output dropout
• Logic-controlled electronic shutdown
• Output programmable from 1.24 to 29V
Applications
• Automotive electronics
• Voltage reference
• Avionics
___________________________________________________________________________________________________________
Block Diagram
LP2590 and LP2951 Block Diagram
(Pin Numbers Refer to LP2591)
* LP2950 Discontinuance September 2007.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax + 1 [phone] • http://www.micrel.com
September 2008
M9999-091208