DSC2011FI2-F0016 Datasheet, PDF (1/6 Pages) Micrel Semiconductor – Crystal-less™ Configurable Clock Generator

DSC2011FI2-F0016
Crystal-less™ Configurable Clock Generator
General Description
The DSC2011FI2-F0016 is a programmable, high
performance dual LVCMOS output oscillator utilizing
Micrel's proven silicon MEMS technology to provide
excellent jitter and stability while incorporating
additional device functionality. Two LVCMOS outputs
are controlled by separate supply voltages to allow for
independent voltage level control. The frequencies of
the outrputs can be identical or independently derived
from a common PLL frequency source.
The DSC2011FI2-F0016 has provision for up to eight
user-defined pre-programmed, pin-selectable output
frequency combinations. The DSC2011FI2-F0016 is
also equipped with independent pin-selectable output
drive strengths to reduce EMI and noise.
Applications
• Consumer Electronics
• Storage Area Networks
- SATA, SAS, Fibre Channel
• Passive Optical Networks
- EPON, 10G-EPON, GPON, 10G-GPON
• Ethernet
- 1G, 10GBASE-T/KR/LR/SR, and FCoE
• HD/SD/SDI Video & Surveillance
• PCI Express
• Automotive
Block Diagram
Control Circuitry
÷2
Features
• Frequency and output formats:
- LVCMOS
25MHz
- LVCMOS
50MHz
• Low RMS phase jitter: <1ps (typ)
• ±25ppm frequency stability
• -40°C to +85°C industrial temperature range
• High supply noise rejection: -50dBc
• Pin-selectable configurations
- 2-bit output drive strength
- Up to 8 output frequency combinations
• Separate power supply (VDD2) for CLK2
• Excellent shock & vibration immunity
- Qualified to MIL-STD-883
• High reliability
- 20x better MTF than quartz oscillators
• Supply range of 2.25 to 3.6V
• AEC-Q100 automotive qualified
• 14-pin 3.2mm x 2.5mm QFN package
VDD/VDD2
÷ M1
O1S0/O1S1
CLK1
25MHz LVCMOS
MEMS
PLL
FS0/FS1/FS2
OE
÷2
÷ M2
CLK2
50MHz LVCMOS
O2S0/O2S1
VSS
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax + 1 [phone] • http://www.micrel.com
May 14, 2015
2990
Revision 1.0
[e-mail] or [phone]