SSL32 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 3.0 AMPS. Surface Mount Low VF Schottky Barrier Rectifiers

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
SSL32 THRU SSL34
VOLTAGE RANGE
CURRENT
20 to 40 Volts
3.0 Ampere
FEATURES
• Low profile surface mount package
• Built-in strain relief
• High switching speed, low V_F
• Low voltage drop, high efficiency
• For use in low voltage high frequency inverters,
Free willing ,and polarity protection applications
• Guardring for over voltage protection
DO-214AB(SMC)
MECHANICAL DATA
• Case: Transfer molded plastic
• Epoxy :UL 94V-0 rate flame retardant
• Lead: Solder plated, solderable per MIL-STD-750
method 2026
• Polarity: Color band denotes cathode end
• Weight: 0.007 ounce, 0.25 gram-DO-214AB(SMC)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified.
• Single phase, half wave, 60Hz, resistive or inductive load.
• For capacitive load derate current by 20%.
SYMBOLS
SSL32
Maximum Repetitive Peak Reverse Voltage
V_RRM
20
Maximum RMS Voltage
V_RMS
20
Maximum DC Blocking Voltage
V_DC
20
Maximum Average Forward Rectified Current
at TL see figure1 TL=95℃
I_(AV)
Peak Forward Surge Current
8.3ms single half sine-wave superimposed on
rated load (JEDEC method)
I_FSM
Maximum Instantaneous Forward Voltage @ 3.0A
（Note1）
V_F
Maximum DC Reverse Current at rated ^TA ^{= 25℃}
DC Blocking Voltage per element
TA = 100℃
I_R
Typical Thermal Resistance (Note 2)
R_θJA
R_θJL
Operating Junction Temperature
T_J
Storage Temperature Range
T_STG
Notes:
1. Pulse test: 300μs pulse width,1% duty cycle
2. PCB mounted with 0.55”×0.55”(14.0cm×14.0cm) copper pads
SSL33
30
30
30
3.0
80
0.38
0.5
10.0
55
12
(-55 to +150)
(-55 to +150)
SSL34
40
40
40
0.45
UNIT
Volts
Volts
Volts
Amps
Amps
Volts
mA
℃/W
℃
℃
E-mail: [e-mail] Web Site: www.cnmic.com