SRB620 Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – SURFACE MOUNT BARRIER RECTIFIER

SURFACE MOUNT BARRIER RECTIFIER
SRB620 THRU SRB6100
VOLTAGE RANGE
CURRENT
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Metal to silicon rectifier ,majority carrier conduction
• Low power loss, high efficiency
• High current capability, low V_F
• High surge capacity
• For use in low voltage high frequency inverters,
Free wheeling ,and polarity protection applications
• High temperature soldering guaranteed:
260℃/10 seconds at terminals
D-PAK/TO-252AA
20 to 100 Volts
3.0 Amperes
D-PAK
MECHANICAL DATA
• Case: D-PAK/TO-252AA molded Plastic
• Terminals: Solder plated solderable per MIL-STD-750,
METHOD 2026
• Polarity: Color band denotes cathode
• Standard packaging: 16mm tape (EIA-481)
• Weight: 0.015 ounce,0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified.
• Resistive or inductive load
SYMBOLS SRB620 SRB630 SRB640 SRB650 SRB660
Maximum Repetitive Peak Reverse Voltage
V_RRM
20
30
40
50
60
Maximum RMS Voltage
V_RMS
14
21
28
35
42
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TC=80℃
Peak Forward Surge Current
8.3ms single half sine-wave superimposed on
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage @
6.0A(Note1)
V_DC
20
30
I_(AV)
I_FSM
V_F
0.55
40
50
60
6.0
80
0.75
Maximum DC Reverse Current
TA = 25℃
(Note1) at rated DC Blocking Voltage _{TA = 100℃}
I_R
0.5
50
Typical Thermal Resistance (Note 2)
R_ΘJC
R_θJA
Typical Junction Capacitance (Note 3)
C_j
Operating Junction Temperature
T_J
Storage Temperature Range
T_STG
Notes:
1. Pulse test with PW=300μsec,2% duty cycle
2. mounted on P.C .Board with 14mm2(.013mm thick) copper pad areas
3. Measured at f=1.0MHz and VR=4V
6.0
80.0
400
(-55 to +150)
(-55 to +150)
SRB680
80
56
80
SRB6100
100
70
100
0.85
UNIT
Volts
Volts
Volts
Amps
Amps
Volts
mA
℃/W
pF
℃
℃
E-mail: [e-mail] Web Site: www.cnmic.com