SF301P Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – SUPER FAST GLASS PASSIVATED RECTIFIER

SUPER FAST GLASS PASSIVATED RECTIFIER
SF301P THRU SF304P
VOLTAGE RANGE
CURRENT
50 to 200 Volts
30.0 Ampere
FEATURES
• Glass passivated chip junction
• Low power loss, high efficiency
• Low leakage
• Super fast switching speed
• High surge capacity
• High temperature soldering guaranteed
250℃/10 second, 0.16″(4.06mm) lead length
• Also available with common Anode, add an “A” suffix,
i.e. SF301PA, add as a doubler, add a “D” suffix,
i.e. SF301PD
MECHANICAL DATA
• Case: Transfer molded plastic
• Epoxy: UL94V-0 rate flame retardant
• Lead: Solderable per MIL-STD-202E method 208C
• Polarity: as marked
• Mounting position: Any, 10 in-lbs Torque Max
• Weight: 0.22ounce, 6.3 gram
TO-3P(TO-247AD)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS SF301P
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
Maximum RMS Voltage
V_RMS
35
Maximum DC Blocking Voltage
V_DC
50
Maximum Average Forward Rectified Current
At Tc=100℃
I_(AV)
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
rated load (JEDEC method)
I_FSM
Maximum Instantaneous Forward Voltage per at 15.0A
Maximum DC Reverse Current at rated ^TA ^{= 25℃}
DC Blocking Voltage at
TA = 125℃
Maximum Reverse Recovery Time
Test conditions IF =0.5A, IR =1.0A, IRR =0.25A
Typical Junction Capacitance
(Measured at 1.0MHz and applied reverse voltage of 4.0V)
Typical Thermal Resistance (Note 1)
Operating Junction Temperature
Storage Temperature Range
Notes:
1. Unit mounted on heatsink
V_F
I_R
t_rr
C_J
R_θJC
T_J
T_STG
SF302P
100
70
100
SF303P
150
105
150
30
250
1.0
10
500
35
60
1.5
(-55 to +150)
(-55 to +150)
SFF304P
200
140
200
UNIT
Volts
Volts
Volts
Amps
Amps
Volts
µA
nS
pF
℃/W
℃
℃
E-mail: [e-mail] Web Site: www.cnmic.com