S5A Datasheet, PDF (1/2 Pages) Micro Commercial Components – 5 Amp Silicon Rectifier 50 to 1000 Volts

SURFACE MOUNT RECTIFIER
S5A THRU S5M
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
5.0 Ampere
FEATURES
• Plastic package has underwrites laboratory flammability
Classification 94V-0
• For surface mounted applications
• Low profile package
• Built-in strain relief, ideal for automated placement
• Glass Passivated chip junction
• High temperature soldering:
250℃/10 second at terminals
MECHANICAL DATA
• Case: JEDED DO-214AA molded plastic over glass passivated chip
• Terminals: Solder plated, Solderable per MIL-STD-750, method 2026
• Polarity: Color band denotes cathode end
• Weight: 0.007ounce, 0.25 gram
DO-214AB(SMC)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
SYMBOLS S5A S5B S5D S5G S5J
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100 200 400 600
Maximum RMS Voltage
V_RMS
35
70 140 280 420
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600
Maximum Average Forward Rectified Current
at TL =100℃ (NOTE 3)
I_(AV)
5.0
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
I_FSM
100
rated load (JEDEC method) TL=100℃
Maximum Instantaneous Forward Voltage at 5.0A
V_F
1.15
Maximum DC Reverse Current
at rated DC Blocking Voltage
TA = 25℃
TA = 125℃
I_R
10.0
250
Typical Reverse Recovery Time (NOTE 1)
t_rr
2.5
Typical junction capacitance (NOTE 2)
C_J
60
Typical Thermal Resistance (NOTE 3)
R_θJL
47
R_θJA
13
Operating Junction and Storage Temperature Range T_J,T_STG
-55 to +150
Notes:
1. Reverse recovery test conditions: I_F =0.5A, I_R =1.0A, Irr =0.25A
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts
3. Thermal resistance from Junction to ambient and from junction to lead mounted on
P.C.B.with 0.3×0.3″(8.0 × 8.0mm) copper pad areas.
S53K
800
560
800
S5M
1000
700
1000
UNIT
Volts
Volts
Volts
Amps
Amps
Volts
µA
µs
pF
℃/W
℃
E-mail: [e-mail] Web Site: www.cnmic.com