RSM101 Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – SURFACE MOUNT RECTIFIER GLASS PASSIVATED FAST RECOVERY RECTIFIER

SURFACE MOUNT RECTIFIER GLASS PASSIVATED FAST RECOVERY RECTIFIER
RSM101 THRU RSM107
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
1.0 Ampere
FEATURES
• For surface mounted applications
• Glass passivated chip junction
• Low leakage current
• Fast switching speed
• Plastic package has underwrites laboratory flammability
Classification 94V-0
• High temperature soldering guaranteed
250℃/10 second at terminals
MECHANICAL DATA
• Case: molded plastic
• Polarity: band indicate cathode
• Mounting position: Any
• Weight: 0.12 grams
DO-213AB
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS
RSM
101
RSM
102
RSM
103
RSM
104
RSM
105
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100 200 400 600
Maximum RMS Voltage
V_RMS
35
70 140 280 420
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600
Maximum Average Forward Rectified Current TT=100℃
I_(AV)
1.0
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
I_FSM
30
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
V_F
1.3
Maximum DC Reverse Current
at rated DC Blocking Voltage at
TA = 25℃
TA = 125℃
I_R
5.0
100
Typical Reverse Recovery Time (NOTE 1) TJ=25℃
Trr
150
250
Typical Junction Capacitance (Note 2)
C_J
15
Typical Thermal Resistance (Note 3)
R_θJT
40
Operating and Storage Temperature Range
T_J,T_STG
-55 to +150
Notes:
1. Reverse recovery test conditions: I_F=0.5A, I_R=1.0A, Irr=0.25A
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts DC.
3. Thermal resistance from Junction to terminal 6.0mm² copper pads to each terminal.
RSM
106
800
560
800
RSM
107
1000
700
1000
UNIT
Volts
Volts
Volts
Amps
Amps
Volts
µA
500
nS
PF
℃/W
℃
E-mail: [e-mail] Web Site: www.cnmic.com