RS3A Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT FAST SWITCHING RECTIFIER

SURFACE MOUNT FAST RECOVERY RECTIFIER
RS3A THRU RS3M
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
3.0 Ampere
FEATURES
• Glass Passivated chip junction
• Built-in strain relief
• Fast switching speed for high efficiency
• High temperature soldering guaranteed:
250℃/10 second at terminals
MECHANICAL DATA
• Case: Transfer molded plastic
• Epoxy: UL 94V-0 rate flame retardant
• Lead: Solder plated, solderable per MIL-STD-202E
method208C
• Polarity: Color band denotes cathode end
• Weight: 0.007ounce, 0.25 gram-DO-214AB (SMC)
DO-214AB(SMC)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified.
• Single phase, half wave, 60Hz, resistive or inductive load.
• For capacitive load derate current by 20%.
SYMBOLS RS3A RS3B RS3D RS3G RS3J
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100 200 400 600
Maximum RMS Voltage
V_RMS
35
70 140 280 420
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600
Maximum Average Forward Rectified
Current at TL =100℃
I_(AV)
3.0
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
I_FSM
100
rated load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 3.0A
V_F
1.3
Maximum DC Reverse Current
at rated DC blocking voltage at
TA = 25℃
TA = 125℃
I_R
10.0
250
Typical Reverse Recovery Time
Test conditions IF=0.5A, IR=1.0A, IRR=0.25A
T_rr
150
250
Typical Junction Capacitance (NOTE 2)
C_J
60
Typical Thermal Resistance (NOTE 1)
Operating Junction Temperature Range
R_θJA
R_θJL
T_J
50
15
-55 to +150
Storage Temperature Range
T_STG
-55 to +150
Notes:
1. Thermal resistance from Junction to ambient and from junction to lead mounted on
PCB with 0.3×0.3″(8.0 × 8.0mm) copper pad areas.
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts
RS3K
800
560
800
RS3M
1000
700
1000
UNIT
Volts
Volts
Volts
Amps
Amps
Volts
µA
500
ns
pF
℃/W
℃
℃
E-mail: [e-mail] Web Site: www.cnmic.com