MZ1.5PB11V-34.1 Datasheet, PDF (1/4 Pages) MIC GROUP RECTIFIERS – SURFACE MOUNT GALSS PASSIVATED ZENER DIODE

SURFACE MOUNT GALSS PASSIVATED ZENER DIODE
MZ1.5PB11V-34.1 THRU MZ1.5PB200V-1.9
Zener Voltage
Steady state Power
11 to 200 Volts
1.5 Watts
FEATURES
• For surface mounted applications in order to
Optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Typical IR less than 1μA above 11V
• High temperature soldering:
260℃/10 seconds at terminals
• Plastic package has Underwriters
Laboratory Flammability Classification 94V-O
DO-214AA(SMB)
MECHANICAL DATA
• Cass: JEDEC DO-214AA,molded plastic over passivated
junction
• Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
• Polarity: Color band denotes positive end (cathode)
• Standard Packaging: 12mm tape (EIA-481)
• Weight: 0.003 ounces, 0.93 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
DC Power Dissipation @ TL=75℃, Measure at Zero Lead Length
(Note 1 Fig.1) Derate above 75℃
Peak forward Surge Current 8.3ms single half sine/square wave
Superimposed on rated load (JEDEC Method) (Notes 1.2)
Operating junction and Storage Temperature Range
Symbols
PD
IFSM
TJ, TSTG
Value
1.5
15
10
-55to~+150
Unit
Watts
mw/℃
Amps
℃
Notes :
1. Mounted on 5.0mm²(.013mm thick) land areas
2. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
E-mail: [e-mail] Web Site: www.cnmic.com