MB4005 Datasheet, PDF (1/2 Pages) Micro Commercial Components – 40 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
MB4005 THRU MB4010
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
40 Amperes
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260 ^oC/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Plated 0.25” (6.35mm) lug.
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max.
l Weight:1.02 ounce, 29 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
MB-35N
1.14( 28.9)
1.12( 28.4)
0.666( 16.9)
0.626( 15.9)
AC
1.14( 28.9) 0.728( 18.5)
1.12( 28.4) 0.688( 17.5)
-
+
0.666( 16.9)
0.626( 15.9)
AC
0.570( 14.5)
0.530( 13.5)
0.205( 5.2)
0.197( 5.0)
DIA
EXOPY CASE
0.09( ^{2.3) DIA}
0.32( 8.2)
0.30( 7.8)
0.68( 17.3)
0.587( 14.4)
0.033( 0.84)
0.028( 0.71)
0.252( 6.4)
0.248( 6.3)
0.252( 6.4)
0.248( 6.3)
Dimensions in inches and (millimeters)
SYMBOLS MB4005 MB401 MB402 MB404 MB406 MB408 MB4010 UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum Average Forward Rectified Output
Current, at TC=55℃(See FIG.1)
I(AV)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
IFSM
Method)
Rating for Fusing(t<8.3ms)
I²T
Maximum Instantaneous Forward Voltage at 20.0A
VF
Maximum DC Reverse Current at
rated DC blocking voltage
TA=25℃
TA=100℃
IR
Isolation Voltage from case to lugs
VISO
40
400
664
1.1
10
1.0
2500
Amps
Amps
A²S
Volts
µAmps
mAmps
VAC
Typical Thermal Resistance (Note 1,2)
RθJC
1.4
℃/W
Operating Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
NOTES:
1. Unit mounted on 9”×3.5”×4.6”(23×9×11.8cm) Al. finned plate.
2. Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
E-mail: [e-mail] Web Site: www.cnmic.com
1/2