KBU10A Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
KBU10A THRU KBU10M
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
10.0 Amperes
FEATURES
l Low cost
l This series is UL recognized under component index , file
number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High temperature soldering guaranteed:
260 ^oC/10 second, 0.375” (9.5mm) lead length at 5 lbs.(2.3kg)
tension.
0.185(4.7)
0.165(4.2)
X45°
0.935(23.7)
0.895(22.7)
+
AC ^-
RS-6
0.28(7.1)
0.26(6.6)
0.089(2.3)
0.069(1.7)
0.160(4.1)
0.140(3.6)
0.19(4.8)
0.17(4.3)
0.24(6.1)
0.22(5.6)
0.700(17.8)
0.660(16.8)
0.760(19.3)MAX
MECHANICAL DATA
l Case: Transfer molded plastic
l Terminal: Lead solderable per MIL-STD-202E method 208C
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #6 screw, 5 in.-lbs terque max
l Weight: 0.27 ounce, 7.59 gram
0.260(6.6)
0.180(4.5)
0.220(5.6)
0.180(4.6)
0.052(1.3)DIA.
0.048(1.2)TYP.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS
KBU
10A
KBU KBU
10B 10D
KBU
10G
KBU
10J
KBU
10K
KBU
10M
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800 1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
TC=50℃ (Note 2)
I(AV)
Maximum Average Forward
Rectified Output Current, at
TC=100℃ (Note 2)
TA=45℃ (Note 3)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
Rating for Fusing (t<8.3ms)
I²t
Maximum Instantaneous Forward Voltage Drop per
bridge element at 10.0A
VF
Maximum DC Reverse Current at rated ^TA^=25℃
DC blocking voltage per element
TA=100℃
IR
Typical Junction Capacitance (Note 1)
CJ
50
100
200
400
600
800 1000
10.0
8.0
6.0
350
373
Volts
Amps
Amps
A²s
1.0
Volts
5.0
µAmps
1.0
mAmps
200
pF
Typical Thermal Resistance (Note 2)
RθJC
5.0
℃/W
Operating and Storage Temperature Range
TJ, TSTG
-55 to +150
℃
NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2. Unit mounted on 6.0”x5.5”x0.24” thick (15x14x0.6cm) Al. plate.
3. Unit mounted in free air, no heatsink, P.C.B at 0.375” (9.5mm) lead length with 0.5”x0.5” (12x12cm) copper pads
E-mail: [e-mail] Web Site: www.cnmic.com
1/2