KBPC1005 Datasheet, PDF (1/2 Pages) Semtech Corporation – 3.0A SINGLE - PHASE SILICON BRIDGE

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
KBPC1005 THRU KBPC1010
BR305 THRU BR310
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
3.0 Amperes
FEATURES
l Low cost construction
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260 ^oC/10 second, at 5 lbs. (2.3kg) tension.
0.445( 11.3)
0.405( 10.3)
BR-3
0.10( 2.5) x45
0.158(
0.142(
4.0)
3.6)
DIA
+
AC
0.445( 11.3) 0.620( 15.7)
0.405( 10.3) 0.580( 14.7)
AC
-
0.620( 15.7)
0.580( 14.7)
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Lead solderable per MIL-STD-202E method 208C.
l Polarity: Polarity symbols molded on case
l Mounting: Thru hole for #6 screw, 5 in.-lbs torque max.
l Weight:0.093ounce, 2.62 grams
0.270( 6.9)
0.230( 5.8)
0.85( 21.6)
MIN
0.75( 19.0) MIN
0.08( 2.0) MIN
0.034( 0.86) DIA
0.028( 0.71) TYP
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
Dimensions in inches and (millimeters)
SYMBOLS
KBPC1005
BR305
KBPC101
BR31
KBPC102
BR32
KBPC104 KBPC106
BR34 BR36
KBPC108
BR38
KBPC1010
BR310
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
Maximum Average Forward TC=50℃ (Note 2)
Rectified Output Current, at _{TA=25℃ (Note 2)}
I(AV)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
IFSM
Method)
Rating for Fusing(t<8.3ms)
I²T
Maximum Instantaneous Forward Voltage at 5.0A
VF
Maximum DC Reverse Current at rated T_A=25℃
DC blocking voltage per element
TA=100℃
IR
Isolation Voltage from case to leads
VISO
3.0
2.0
60
15
1.0
5.0
0.5
2500
Typical Junction Capacitance Resistance (Note 1)
CJ
20
Typical Thermal Resistance per element (Note 2)
RθJA
12
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts
2. Unit mounted on 4.0”×4.0”×0.11” thick (10.5×10.5×0.3mm) Al. plate.
3. Unit mounted on P.C.B at 0.375” (9.5mm) lead length with 0.5”×0.5” (12×12mm) copper pads.
-55 to +150
1000
Volts
Amps
Amps
A²S
Volts
µAmps
mAmps
µAmps
℃/W
℃/W
℃
℃
E-mail: [e-mail] Web Site: www.cnmic.com
1/2