GBU6A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 100 Volts CURRENT - 6.0 Amperes)

GLASS PSSIVATED SINGLE-PHASE BRIDGE RECTIFIER
GBU6A THRU GBU6M
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
6.0 Amperes
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Glassification 94V-0
• Ideal for printed circuit boards
• Glass passivated chip junctions
• High surge current capability
• High temperature soldering guaranteed
260℃/10 seconds, 0.375”(9.5mm) lead length
at 5 lbs. (2.3kg) tension
MECHANICAL DATA
• Case: molded plastic body over passivated junctions
• Terminal: Plated leads solderable per MIL-STD-750
Method 2026
• Mounting position: Any (Note 2)
• Mounting Torque: 5 in-1b. Max.
• Weight: 0.15 ounce,4.0 gram
GBU
21.8 - 22.3
3.2×45 ^O
R0.5
3.5 - 4.1
3.3 - 3.56
2.16 - 2.54
2.0 - 2.2
1.9 - 2.16
4.83 - 5.35
1.02 - 1.27
0.46 - 0.68
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS
GBU
6A
GBU
6B
GBU
6D
GBU
6G
GBU
6J
GBU
6K
Maximum Reverse Peak Repetitive Voltage
V_RRM
50 100 200 400 600 800
Maximum RMS Voltage
V_RMS
35
70 140 280 420 560
Maximum DC Blocking Voltage
Maximum Average Forward TC=100℃(Note 1,2)
Rectified Output Current, At
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
rated load (JEDEC Method)
Rating for Fusing (t＜8.3ms)
V_DC
I_(AV)
I_FSM
I²t
50 100 200 400 600 800
6.0
150
127
Maximum Instantaneous Forward Voltage drop
Per leg at 4.0A
V_F
1.0
Maximum Reverse Current at rated
DC blocking voltage per element
TA=25℃
TA=125℃
I_R
5.0
500
Typical Junction Capacitance (Note 4)
C_J
211
94
Typical Thermal Resistance (Note 1)
R_JA
21
Typical Thermal Resistance (Note 2)
R_JL
2.2
Operating and Storage Temperature Range
T_J ,T_STG
(-55 to +150)
Notes: 1. Unit mounted on 2.6×1.4×0.06” thick (6.5×3.5×0.15cm) AL. plate heatsink
2. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum
Heat transfer with #6 screw
3. Measured at 1.0 MHz and applied reverse voltage of 4.0 V
GBU
6M
1000
700
100
UNIT
Volts
Volts
Volts
Amps
Amps
A²s
Volts
Amps
mAmps
pF
℃/W
℃/W
℃
E-mail: [e-mail] Web Site: www.cnmic.com