GBPC4005 Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER

GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER
GBPC4005 THRU GBPC4010
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
40.0 Amperes
FEATURES
• Plastic package has UL flammability classification 94V-0
• Integrally molded heatsink provides very low thermal
resistance for maximum heat dissipation
• High forward surge capacity
• Glass passivated chip junction
• High isolation voltage from case to lugs
• High temperature soldering guaranteed:
260℃/10 seconds,
GBPC35
1.135(28.8)
1.115(28.3)
.672(17.1)
.632(16.1)
AC
1.135(28.8)
1.115(28.3)
0 .72(17.1)
.632(16.1)
+
-
.732(18.6)
.692(17.6)
AC
.582 (14. 8)
.542(13.8)
0.094 (2. 4)D IA .
MECHANICAL DATA
0.034 (. 86)
0.030(.76)
.25(6.35)
• Case:Epoxy, Molded Plastic with integrally mounted heatsink
• Terminals: Plated 0.25”(6.35mm) lug
.310(7.87)
.290(7.36)
.840(21.3)
.740(18.8)
• Polarity: Polarity symbols market on case
• Mounting: Thru hole for #10 screw, 20 in-lbs Torque max.
• Weight: 0.62 ounce, 17.5 gram
•
.220(5.59)
.100(5.08)
HOLE FOR
#10 SCREW
METAL HEAT SINK
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS ^{GBPC GBPC GBPC GBPC GBPC GBPC GBPC} UNIT
40005 4001
4002
4004
4006
4008
4010
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100 200 400 600 800 1000 Volts
Maximum RMS Voltage
V_RMS
35
70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
At TC=55℃ (SEE FIG.1)
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
Rating for Fusing (t＜8.3ms)
V_DC
50 100 200 400 600 800 1000 Volts
I_(AV)
35
Amps
I_FSM
300
Amps
I²t
660
A²s
Maximum Instantaneous Forward Voltage drop
Per Bridge element 20.0A
V_F
1.1
Volts
Maximum DC Reverse Current at
TA = 25℃
rated DC blocking Voltage per element _{TA = 125℃}
I_R
5.0
µA
500
Isolation Voltage from case to lug
V_ISO
2500
Volts
Typical Thermal Resistance (Note 1 and 2)
R_ΘJC
1.4
℃/W
Operating Junction Temperature
T_J
(-55 to +150)
℃
Storage Temperature Range
T_STG
(-55 to +150)
℃
Notes: 1.Unit mounted on 9”×3.5”×4.6”(23cm×9cm×11.8cm) AL Plate.
2.Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency
with#10 screw
E-mail: [e-mail] Web Site: www.cnmic.com