GBPC15005-W Datasheet, PDF (1/3 Pages) MIC GROUP RECTIFIERS – GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER

GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER
GBPC15005/W THRU GBPC1510/W
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
15.0 Ampere
FEATURES
• Plastic package has UL flammability classification 94V-0
• Integrally molded heatsink provides very low thermal
resistance for maximum heat dissipation
GBPC35
1.135(28.8)
1.115(28.3)
0.72(17.1)
.632(16.1)
AC
GBPC35W
1.135(28.8)
1.115(28.3)
.470(11.0)
.430(10.9)
AC
• High forward surge capacity
• Glass passivated chip junction
+
1.135(28.8)
1.115(28.3)
.672(17.1)
.632(16.1)
+
.582(14.8)
.542(13.8) ^{1.135(28.8) .732(18.6)}
1.115(28.3) .592(17.6)
• High isolation voltage from case to lugs
• High temperature soldering guaranteed:
260℃/10 seconds,
• A vailable in either lug package (GBPC5005)
or wire lead package (GBPC15005W)
MECHANICAL DATA
• Case:Epoxy, Molded Plastic with integrally mounted heatsink
• Terminals: Plated 0.25”(6.35mm) lug or
plated 0.040” (1.02mm) diameter lead
• Polarity: Polarity symbols market on case
-
AC
.732(18.6)
.692(17.6)
AC
-
.732(18.6)
.692(17.6)
0.094(2.4)DIA.
0.034(.86)
0.030(.76)
.310(7.87)
.290(7.36)
.25(6.35)
.840(21.3)
.740(18.8)
.042(1.07)
.038(.97)
0.310(7.87)
0.290(7.36)
1.25
(31.8)
MIN.
.220(5.59)
.100(5.08)
HOLE FOR
#10 SCREW
METAL HEAT SINK
.220(5.59)
0.200(5.08)
HOLE FOR
#10 SCREW
METAL HEAT SINK
Dimensions in inches and (millimeters)
• Mounting: Thru hole for #10 screw, 20 in-lbs Torque max. See Note 3
• Weight: 0.53 ounce, 15.0 gram-GBPC15 and GBPC15-W
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS ^{GBPC GBPC GBPC GBPC GBPC GBPC GBPC} UNIT
15005/W 1501/W 1502/W 1504/W 1506/W 1508/W 1510/W
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100 200 400 600 800 1000 Volts
Maximum RMS Voltage
V_RMS
35
70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
(SEE FIG.1) at TC=55℃
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
Rating for Fusing (t＜8.3ms)
V_DC
50 100 200 400 600 800 1000 Volts
I_(AV)
15
Amps
I_FSM
300
Amps
I²t
375
A²s
Maximum Instantaneous Forward Voltage drop
Per Bridge element 7.5A
V_F
1.1
Volts
Maximum DC Reverse Current at
TA = 25℃
rated DC blocking Voltage per element _{TA = 125℃}
I_R
5.0
µA
500
Isolation Voltage from case to lug or lead
V_ISO
2500
nS
Typical Junction Capacitance per leg (NOTE 1)
C_j
300
pF
Typical Thermal Resistance per leg (NOTE 2)
R_ΘJC
1.9
℃/W
Operating Junction Temperature
T_J
(-55 to +150)
℃
Storage Temperature Range
T_STG
(-55 to +150)
℃
Notes:
1. Measured at 1.0MHz and applied reverse voltage of 4.0V
2. Thermal resistance from junction to case per leg
3. Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency
with #10 screw.
E-mail: [e-mail] Web Site: www.cnmic.com